Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Is it Possible to Adjust PCIe voltages on Z390-A?

I have a problem getting a peripheral to work. It's a pair of Black Magic Design Intensity Pro 4K capture cards.These were migrated from an 11 year old system where they worked fine. In the Asus board, they were detected and the drivers installed. Th...

Basspig by Level 7
  • 780 Views
  • 0 replies
  • 0 kudos

Rgb question

I have a 5v strip in my ek velocity cpu block I'm wanting to replace with a 12v strip from an rgb pump I have lying around. Is it a bad idea to swap these? Or does it matter? I accidentally plugged the 5v into the 12v connector on the motherboard ...

Hero XI Wifi 9700K LatencyMon pop noise

Hello all,I been getting pop and crackling noise here and there and was told to use LatencyMon if that shows anything and it came up with "Your system seems to be having difficulty handling real time audio and other tasks. I only built the computer ...

Raigoz by Level 7
  • 988 Views
  • 0 replies
  • 0 kudos

Rampage VI Extreme PCIe bifurcation

Hi!Which PCIe slots are supporting PCIe bifurcation in R6E: all or specific ones? This is to understand which slots PCIe splitter card as Hyper M.2 X16 could be populated and set-up in BIOS.Thanks!

Aquacomputer temp sensor question

I just purchased an aquacomputer male to female temp sensor. I heard it is possible to set the fan curve to water temp when watercooling. Can someone explain how to do this? Can't find any info online

Help, problem with Asus Strix GTX1080

I have a Asus Strix GTX1080 Advanced edition, out of nowhere, in the middle of a game, it froze and then wouldn't output any video. After restarting still no video output, the fans spin then stop after couple second and the lights glow on and off ora...

Maximus XI Hero Wifi first time setup advice please

Hello all,So I am building my very first computer from ground up before that I usually get them pre built my system I am moving from is a 6700k with a maximus VIII Board. I would like to get some advice as all my parts arrive tomorrow.I am getting a ...

Raigoz by Level 7
  • 3113 Views
  • 0 replies
  • 0 kudos