I have the Logitech z906 5.1 speaker system and the ROG Maximus XI Hero.I have been using this system with 3wire 3.5mm jack and the onboard audio. I am able to configure the speakers in "supreme fx" and set audio levels and distance corrections which...
Hello, I've currently upgraded my pc, following hardware- Asus Maximus XI Hero (wifi)Intel I5 9600kCorsair Vengeance rgb pro 16gb.I've just sold both of my asus 970 strix old I know, and I'm looking at the new rtx series, I'm looking for any advice a...
Hi, I'm thinking about doing a custom loop, and I'm looking for water blocks for mty GTX 1080ti Strix. Does anyone have any experience with Bitspower? They claim that the ROG backplate is compatible with their block, and that's why I'm thinking abou...
My graphic card GTX580(HP stock) was broken out of sudden, so I had purchased a new graphic card GTX1060(Strix dc2o6g) and installed it into my PC. But when I start-up my PC it boot until the HP splash screen and stopped can't move any further to the...
I have my OS on an EVO 970 M.2 NMVE installed on my Maximus XI Hero WII have two identical SSD which I would like to put into RAID 0. Bios was set to AHCI but a friend told me to change it RAID so should I do that?BIOS shows both SSD drives in SATA P...
is it possible to backup the firmware of your aquantia lan and send it to me? it very important to fix mine
Hello, I'm hoping to find some help. This is the 2nd board I've received. RMA'd the first one with customer service thinking its a hardware issue. I've tried both the 1g and 5g LAN ports, the WiFi LAN. I cannot get more than 20 Mbps download, and ma...
Hello to anyone who reads this.I would appreciate any help in clarifying whether you can use Samsung SSDs on the DIMM.2 slot for RAID 0 bootable configuration, or does it work only with Intel branded SSDs.Thanks for any help.Dimitris
Hi, I have some strange problems. Two as I know of. Setup:Asus XI FromulaAsus RTX 2080 Dual OC TIAsus Thor 850w PSUCorsair 64GB RAMI9 9900K1st: Sometimes I cannot enter Bios even if my keyboard has led light on (it seams active but is not)After some ...
Hey guys! It's my first build and I've try to check for the in formation but it seems that I can't find the answer. The OLED screen is above where I'm supposed to place the middle screw. I can't find the way to remove the screen but when you look at ...
