Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...
Is anyone running a Asus TUF Gaming X570-Plus WiFi AM4 ATX Motherboardwith a 3900x ?I've ordered a 3700x, contemplating upgrading to a 3900x (im not over clocking)im using this machine for rendering and semi gaming
Hello everyone,So I've recently purchased a 970 Evo Plus 1TB M.2 NVMe SSD which i installed onto my ASUS STRIX X299-XE motherboarboard. The sequential read speed for this SSD is supposed to be 3500 MB/s and write speed 3300 MB/s. However my sequentia...
Helloi am a proud owner of the Asus Rog Scar 2 Notebook.In the past i had some problem with the throttling of cpu and Gpu, but i solve it.Now i want to use it for Video Editing too, but i only have 16 g of Ram.The Ram speed is 2666 MHZ. Is it possibl...
I saw that the board had an updated BIOS in the web site. I went ahead and installed it. The machine booted into the BIOS and applied the update, progressed through the update, got to the end and rebooted. Now the machine boots, I get the Beep. I ...
I'm feeding my newly purchased LG C9 OLED with the Strix Vega 56 via HDMI.The Strix info states the card is HDMI 2.0b and the C9 is HDMI 2.1 capable. HDMI 2.0b specs state that format can deliver 8bit 4k @60Hz Full RGB/YCbCr 4:4:4However, when I sele...
Hello everyone!I saw many of you talk about going to Advanced -> Onboard Devices Configuration in BIOS where you'd see some M.2_1 and M.2_2 configuration or whatsoever, but I don't have any M.2 configuration settings in the Advanced/Onboard Devices C...
Have you ever seen something like this? I disassembled the entire laptop and did not find any liquid or its traces. But when i unscrewed a small fan which was screwed tight enough i found this. This is my laptop, never spilled anything on it and ther...
I just bought an ASUS Strix z390-e gaming board and wanted to make sure I hooked it up correctly.It has eatxpwr & eatx12v connections. Do I need to hook up both of them? or is there any benefit of doing just one compared to the other?I will be using ...
Hey guys,I'd be happy about a short feedback to the following new build:i9 9900K (5,0 to 5,1 GHz overclock)Nocture Noctua D15s dual fan coolerGigabyte Z390 Aorus Master Intel Z390 So.1151 Dual Channel DDR44 x 16 GB G.Skill Trident Z silber/rot DDR4-3...
I have a g752VM with a broken right hand screen hinge. I have had 2 widely different quotes for repair - based on whether the hinge is the same across all the g752 models. Can someone please tell me the correct part number and if its different from o...
