Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Asus ROG Crosshair VII memory confusion

Having asked / read a lot here, I am still confused / not sure on what the best combination will be.I have decided on:Asus ROG Crosshair VII (wi-fi) motherboardRyzen 7 2700X Gen 2Dark base Pro 900 Rev 2 caseCorsair RMx 750W PSU OR be quiet! - Straigh...

devdeep by Level 7
  • 1140 Views
  • 3 replies
  • 1 kudos

Trying to decide on RAM speed for Intel 9900K

Intel 9900KMaximus XIPoseidon GTX 1080ti (until I can afford RTX 2080ti, but uncertain if it's worth it)Water cooled with 1 loop for the CPU and Mosfets and 1 loop for the GPU's.I've searched a bit for some benchmarks with 9900K vs different RAM spee...

Sverre by Level 9
  • 1590 Views
  • 2 replies
  • 7 kudos

Which Motherboard for i9 9900k ?

Hello,I finally decided to upgrade my old system (Asus V rampage,i7 5930k) and i was wondering which asus motherboard will be better for the i9 9900k.I was going for the Hero,but i heard it has higher vram/cpu temp because of the 4phases design and c...

Arne’s guide to PC building happiness

“But what is happiness except the simple harmony between a man and the PC he builds?”Albert Camus “To enjoy good health, to bring true happiness to one's family, to bring peace to all, one must first discipline and control one's own PC. If a man can ...

70926 70927 70928 70939

Qled Light - White VGA - No Video

I recently built a new system, everything loaded and system was operational but I noticed the Fan for the GPU wasn't working, RMA it back to EVGA and received a replacement, now the system wont boot up and the QLed light is on for the VGA - No output...

Asus ROG Crosshair VII Panel port connections

For a newbie, can someone with a Crosshair VII please tell me where on the Motherboard do the following connections go:See the attached (This is the PCB Ports diagram on Be Quiet! Dark Base Pro 900 Rev. 2 Case):A - PWM to the MotherboardC - LED conne...

devdeep by Level 7
  • 1299 Views
  • 1 replies
  • 1 kudos

ASUS ROG G75VW GPU swap recommendation

So, I've noticed that the G75VW has a removable gpu, seeing as I thought that it was soldered on to the motherboard this was a surprise. I really need to get a better gpu than the one I have, which is a Nvidia Geforce GTX 660m 2GB. I need more than 2...

ROG STRIX Z370-F - Random freezes after bios / ME update

Hey guys,I had some issues the last month with some usb devices, so I decided to update my bios from 0606 to latest 1802. I also updated ME like adviced by asus.Everything went fine, and my usb issues were gone. But now I got massive problems with ra...

Mugga by Level 7
  • 784 Views
  • 0 replies
  • 0 kudos

Rampage v Edition 10 PCI E lanes set at 16x/8x with 5930k

Hi chaps, hoping someone has some answers for me.I recently 'upgraded' from a maximus iv and 2600k to a rampage v edition 10 and a 5930k for a good price.I chose the 5930k as I have two matrix 980ti in sli so wanted 16x/16x.However both my GPU post i...

Morkrah by Level 7
  • 4616 Views
  • 26 replies
  • 24 kudos

Adding more LEDS, With external PSU Maximus IX Formula

Hey Guys, I was hoping to add more LED Lightstrips, but outside of my case. I planned on using standard 5050 RGB just like the ones ive already added into the case but i dont want to over drive the Headers. As far as i can tell this should be as simp...