Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

B450-F-Gaming CPU Temp sensor

Hey at all!First of all sry for my bad english im from germany  .I try to describe my problem.Ive bought a mainboard and cpu and so on.After i build the system i push power on and go to the uefi and the cpu temp sensor shows me -24Degrees celsius! H...

aui90 by Level 7
  • 6892 Views
  • 4 replies
  • 0 kudos

5960x + Rampage V E10 Qcode 95

Hi all,So I bought a 5960x to replace my 5930k,With the 5960x in the system I am hanging on Qcode 95 at boot.I have tried one ram stick to no avail and also resetting CMOS. Also tried other bios chip.I unplugged all USB devices and got one successful...

Morkrah by Level 7
  • 1360 Views
  • 2 replies
  • 0 kudos

Gaming chair recommendations

Ok so this is TECHNICALLY a hardware question but I need a recommendation for a good chair to sit in for hours at a time, perferably with good support so my legs don't fall asleep or my back decides to play the fatigue game after 2 hours of fallout 4...

Veovis by Level 10
  • 10227 Views
  • 11 replies
  • 0 kudos

Silly idea

Hey everyone!I thought of something silly but could be creative Everyone, just type your full build and anyone can advice you on what shall you change.

Maximus X Code USB 3.0 Issue

Hey all, I've been having an unusual issue with the USB 3.0 ports on my case (Phanteks Enthoo Pro M). One of the ports works, but the other doesn't. I tried the obvious things first, like reconnecting the cable to the header, making sure pins weren't...

BIOS Flashback & EZ Flash both failing...

Hi there, could really use some help here...Just finishing up my build. I suppose I should have updated BIOS first, but that's water under the bridge now - I'm very cautious about doing that, makes me super nervous and would rather not unless I have...

S4lticid by Level 9
  • 3013 Views
  • 6 replies
  • 26 kudos