Can a Max VII Formula MB, boot to a M.2 SSD on a PCIE M.2 NVME expansion board?
As the title expresses.
As the title expresses.
Hi all,After finishing my build and installing Windows 10 for the first time; should I use up-to-date vendor drivers or the drivers only from the Asus support website?Thanks in advance
Hi everyone,I am planning to replace my two SSD 2.5" old drivers by two x m.2 PCIE (NVME) but I'm wondering if I could generate some motherboard heating issues. Also this MOBO comes only with one m.2 heatsink.Also, is there any reason consider m.2 s...
Hi, I'm sorry for the urgency but it is real.I need to buy one of them:https://www.unieuro.it/online/Notebook/N580GD-FY624T-pidASUN580GDFY624Thttps://www.unieuro.it/online/Notebook/N580GD-DM041T-pidASUN580GDDM041Thttps://www.unieuro.it/online/Noteboo...
I have Asus M3A78-T motherboard , it has the latest Bios Version 2001 Unfortunately it does not boot from USB drive.But It will read USB drive My hardrive has bad sector so it will not load OS Windows 10, before this issue everything was ok, Win...
Hello everyone,I'm planning to buy this rgb ssd: https://www.teamgroupinc.com/en/product/deltamaxssdWill this ssd can be recognize by my motherboard Maximus VII Hero that has a Rev. 1.xx ?Please let me know so that I can decide if I will buy this rgb...
The ARGB header on the MOBO is 3 pins (or rather, 4 including 1 blank). The exact same design as the RGB input on the Sapphire Nitro+ 5700xt. I’m still waiting for a pinout from Sapphire, but I’m wondering if anyone has had any success connecting it?...
Windows Event Log is showing tens of thousands errors (EventID 521) describing a 'AHCIPortErrorRecovery' on Port Number 0, Bus 0, Target 0, Lun 0Bus 0, Target 0, Lun 0 may refer to a Windows SSD (drive C) linked to SATA port 1 (1st Controller, port 1...
I've never used the dual BIOS feature, is it possible to flash 2 different BIOS versions on this mobo e.g., say I want to flash 1302 on BIOS 1 and 1105 on BIOS 2 ?
Hi everybody. Thanks for all the help so far. I've been slowly putting my first build together after work each night, and I'm almost through. The last thing I need to do is wire the graphics card. I've got the card installed and screwed in, but I hav...