Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...
I'm having 2 issues with my system, which I'm hoping can be corrected with BIOS or driver updates instead of having to do an RMA:1. My USB 3.1 ports are unstable when reading and writing to attached devices. So far my Samsung T5 SSD and my Canon 5D M...
Please delete
So this is my first forum post so please forgive any errors but i have an interesting issue.I have a ROG STRIX B350-F GAMING which has been running a ryzen 5 1600 with g-skill trident z 3600 down clocked to 3200all well and good, no issues and a good...
I recently had the pump on my Corsair H110i fail which caused a thermal shutdown. I replaced the H110i (was about 4 years old) with a H115i. I reset my overclocks to stock, and for some reason I am getting higher temps than when I had the H110i in, e...
Hi and happy new year, I have a spare PCIe slot on my Maximus VII Formula m/b and decided to treat myself to a Samsung 970 EVO Plus NVMe M2 and an adapter. Windows had no problem finding it, but no joy in the bios (I was hoping to boot from it). Is t...
Hii guys i need your help asap, i have rog laptop with 2 hard drives, one is adata ssd 240 (os drive) and one intel 660 p nvme ( for games).I found out that the intel drive is faulty because if i install big games on it, it just disappears from the s...
This happened the second time and it's a dilemma but the thing is it shows the fact this happened twice before today compared to what happened the day before. What I did was reboot the PC and it went away. Is this a motherboard issue thing? I still s...
I built my rig in 2013, MVE, eatx case, I7 CPU, dual fan RAD water cooled, SLI GTX690's, Samsung 850 Pro SSD, SSD Storage, Corsair ddr3 and AX1200i PSU, Proprietary CAD software on the wonderful Win 7 software (my job, retired last year) and she ran ...
I am starting to upgrade my computer 1 part at a time. Currently I have a Crosshair VI Her0 with latest bios, AMD Ryzen 5 1600 (3.4 Mhz), 2 x Trident Z RGB 8GB 3200 (16-18-18-38 @ 1600Mhz), EVGA GTX 1060 6GB video card in a Thermaltake Overseer RX-1 ...
I got my new case yesterday (Enthoo 719) and I ran into an issue with it. All the front USB ports (there are 4) are 3.0 and they connect to the motherboard with 2 separate wires. The problem is that my board (Crosshair VI Hero) only has 1 USB 3.0 po...
