Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...
Hi All,I've built the PC below a while ago now. It's a 7 year old system which I intend to try and keep alive even after such long time. The reason is that I'm on a budget and cannot afford a completely new build. Although I know these components are...
Hello, I was wondering if all gtx 1650 supers fit in the G20cb desktop and will it need an extra 180w powersupply. Searched the forum and could not find anything on the subject. Any comments will be appreciated. Thanks
Hi,I have a 500G m.2 EVO as drive C & just bought a 1T m.2 Evo. I want to clone my now C drive to the 1T drive using Acronis.As I understand it, the 2nd M.2 slot is treated as a pcie, not a SATA. I want to do the cloning and then switch drives so the...
I have a X299 deluxe motherboard first edition.I want to make a Raid on it but the info from manual are confusing.I do not want to boot from the raid.I just want to keep it for data.I have two 6 Terabytes red western digital and i want to make a Rai...
I have a ROG STRIX G531GT the one with a 60hz panel I'm curious if I can switch it with the 120hz panel. If so where might I find this panel?
Apologies in advance if this has been covered in past threads -My new build uses a STRIX Z390-E GAMING mobo and an Optane 900p AIC as my C Drive.Windows 10 is installed and I am looking for some advice on installing 2 Samsung 970 EVO SSD 500GB...
The little white LED light on my x570 VIII Hero wont turn off even after my computer has powered down for the night. How do i fix this?
I have seen others post about qcode 8 problems, but others seem to have a more serious problem such as not being able to post or get to windows 10 boot. I am able to boot into windows 10 pro without problems. The issue happens that randomly my comput...
Hi, everyone. I have a strange issue with my mobo. During the work PC can suddenly hang up and turns on black screen. POST Code screen shows 8 at first position of led (NOT 08 or 80, just 8). Dram led blinking with yellow.
hi everyone i have a question about my maximus xi formula mobo .*i already enabled erp s4+s5 in the bios , but my ryujin 360 is still on even if the pc is off, am i missing something*i tried erp s5 mode ryujin 360 led off but my usb devices led turns...
