Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

DRAM Stability - Methodology & Tools

Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...

Silent_Scone_0-1739425315162.png Silent_Scone_0-1739253034190.png ezgif-3242b6279bacca.jpg

Regularly asked Questions about Fan Xpert

I was finally able to get Ai SUITE installed with all the plug-ins. My D5 pump is supposed to be controlled via pwm header. it is not but should I even worry about that? Also, the Tower 900 comes with 2 identical fans pre-installed. The top front fan...

looking to upgrade my 10 year old PC

Hi all I am currently running a Sandybridge i5 2500k with 1600mhz RAM on a asus maximus IV extreme Z mobo, it has a RTX 2080 and Im hoping to upgrade to fully utilise this GPU. I just want everyone's opinion on what upgrades I should make. I was look...

Aamar by Level 7
  • 1799 Views
  • 0 replies
  • 0 kudos

Instalation process

I'm a noob at this, I never did a gpu change by my self so I prefer to ask what to do first.1st- I have to uninstall gpu tweek first, install the new gpu and then install again gpu tweek to recognize the new gpu parameters? (I have a strix Gtx 980 wi...

PC Double boots on cold boot, then straight to BIOS

Ive been having some issues as of late with my Strix z270e mobo, double booting into the BIOS on cold boots. This started recently after updating Win10 Pro to CU KB4549951. No modifications or major changes except this, in which this began immediatel...