Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

DRAM Stability - Methodology & Tools

Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...

Silent_Scone_0-1739425315162.png Silent_Scone_0-1739253034190.png ezgif-3242b6279bacca.jpg

Help, find a 3080

ROG help, my Strix gpu died a whimpering death a few days ago and I thought it would be a good time to upgrade to one of your new 3080 models. Ha not a chance I cant find one for love or money. This is bad as there are several new games on the horiz...

JGFozzy by Level 7
  • 876 Views
  • 1 replies
  • 0 kudos

ROG Zenith II Extreme Alpha and RAM Placement

Just finished building my new computer. Two sticks of 8GB corsair 3200 RAM, originally placed in the recommended positions according to the manual - A1 and C1 slots.Userbenchmark and other tests like memtest86 showed a way below par performance. Just...

Asus Maximus Hero xii wifi and ddr4 4000mhz problema

Hello I hope I can get some help Please? My New Build Asus Maximus Hero xii wifi with an Intel i9-10900k cpu and G.skill F4-4000C17D-32GTZRB DDR 4 ram will not post if setting M/B XMP to XMP1 it will show what the ddr 4 is and all that, but...

Wolfin by Level 7
  • 1092 Views
  • 1 replies
  • 0 kudos

New build not posting, please help!

Hi,I'm building a new PC and I am running into an issue I can't solve. If anybody can offer some help or advice, it would be greatly appreciated.My components:Asus Rog Strix X570-i GamingAMD Ryzen 9 5900x16gb x 2 G.Skill Trident Z Neo 3600mhz cl16RTX...

Qled vga b550 f gaming

So I am trying to see if my new build will post, this is the 2nd motherboard I've been given by Amazon and again the issue is that the VGA led stays on. I don't have a graphic card, is this the reason why as it has a onboard VGA for HDMI and DisplayP...

sh3rvin by Level 7
  • 1191 Views
  • 0 replies
  • 0 kudos

4 beeps after installing RTX 3070

Hi, i recently upgraded to an RTX 3070 and after that i am getting the 4 beeps when i power my PC. I googled it and it seems a very common issue to all new 30xx nvidia cards. Some could solve this by disabling CMS mode in the BIOS, problem with this ...

Gregkar by Level 7
  • 4133 Views
  • 1 replies
  • 0 kudos

ASUS Crosshair Hero VIII Error 02 in Board Led

ASUS Crosshair Hero VIII + Ryzen 5900X + RTX 2060 OC Super no Screen on PostI assembled this PC yesterday. I installed all the components, went to turn it on and didn't give it a screen. Error that the VGA card is not supported by the EFI BIOS, howev...