Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

DRAM Stability - Methodology & Tools

Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...

Silent_Scone_0-1739425315162.png Silent_Scone_0-1739253034190.png ezgif-3242b6279bacca.jpg

TUF GAMING Z490-PLUS - 10900K pcie lanes

Hi AllDoes anyone know if using both NVME slots, especially the 2nd one will slow down the GPU on this board (tuf gaming z490 plus) I have 10900k and a 2080 ti and I plan on getting a 2nd nvme drive. Im not sure how the pcie lanes are routed on this ...

fastest 128 GB RAM kit for Dark Hero?

The fastest 128 GB RAM kit on the Dark Hero QVL is the HX436C18FB3K4/128 kit. I bought one but it turned out to be fake (on Amazon by Amazon, not a 3rd party), and it's now out of stock everywhere. But perhaps this is an opportunity, since I heard ...

coyote2 by Level 7
  • 1179 Views
  • 1 replies
  • 0 kudos

128GB Vermeer RAM support >2666?

I'm very interested in the Crosshair VIII Dark Hero. I want the fastest X570 128GB RAM support I can find. This board's Memory QVL isn't up yet, let alone for Vermeer.To be honest, if it's gonna have the same Memory QVL as the rest of the ROG Cross...

coyote2 by Level 7
  • 1984 Views
  • 5 replies
  • 0 kudos

Sata controller card in Rampage VI Extreme Omaga

I'm trying to get two Sata expansion cards to work in my Rampage VI. The drivers on the controllers are good and I can see/use the HDDs and SSDs once the OS is loaded. The controllers are Startech and Syba both controllers are 4 port Raid compatible...

Joe45 by Level 9
  • 827 Views
  • 0 replies
  • 0 kudos

Is this a ,,normal" level of IPS GLOW?

Hi!I just want to hear some opinions about this level of IPS GLOW, the monitor is ASUS VG249Q and this is the photo of the glow (taken with my S20 - set to 200 ISO)and this one with 100 ISO (this one is closer to what I can actually see)This is my fi...

ProDyx by Level 7
  • 871 Views
  • 0 replies
  • 0 kudos

PG35VQ with?

Hi,I currently have the PG348 and I am thinking of upgrading to the PG35VQ. Next to my PG348q (3440x1440) I have a 27" (1920x1080) Samsung monitor. Every time I move a program to that second screen I have to resize it.What would be a good 2nd screen ...

Crasje by Level 13
  • 712 Views
  • 0 replies
  • 0 kudos