So i updated my BIOS from 1303 to the most current one released in March. I don’t know if it finished or not but it’s stuck on code 55. Was working perfectly fine before this.
so i read pretty much every one has issues when changing memory to 2x32 ddr5 5600. with 13 gen intel it will run max 5200 as it is apparently limitation of the CPU. if you want 5600 u have to get 2x16 ddr5 or 2x8 ddr5. thas given. what struck me is t...
So i have an asus rog gl12cp thats missing a ssd tray under the dvd thing and i was wondering if i could buy one from somewhere. If you know where i can buy one, can you reply with a link?
Help with my purchaseASUS ROG STRIX X670E-E GAMING WIFI, AMD Ryzen™ 7 7700X1TB WD Black SN770 M.2 (2280) PCIe 4.0 (x4) NVMe SSD1TB WD Blue SA510, 2.5" SSD, SATA III am starting to think i have made a mistake so need a little help with set up . The...
Hi everyone, I'm writing out of curiosity as I think I've now tried everything without success, I basically installed the bios version at 816 and when I want to update to 904 onwards the q code of the motherboard goes up to the b4 code and restarts t...
I heard that there will be a new version of Armoury Crate coming soon that is "supposed" to be fixed with all of the issues.....Anyone...someone hear this?
After building my PC, I finally got the Crate working after my build (installed as admin), w...
What do you recommend for a future 4080 super graphics card, with a 1200 W Rog Thor 1 power supply ?
I have heard everywhere on the web that the Rog Thor 1 power supply does not have a compatible cable for this graphics card, but that there is an a...
Hello,I was recently having an issue and I'm not sure whether it's motherboard or my CPU. i've built my system 2 months ago and from the beginning I had few issue that have been increasing each week. Initially everything was working okay, except from...
Hello,This does not happen all the time, but when I wake up my computer from sleep, the monitor will start cycling through red, green, blue and white. It goes on for a while, unless I change input or press the X button that is next to the OSD buttons...
