Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

DRAM Stability - Methodology & Tools

Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...

Silent_Scone_0-1739425315162.png Silent_Scone_0-1739253034190.png ezgif-3242b6279bacca.jpg

Asus X99 Rampage V Extreme, PCE-E Lanes

I am trying to run the board in 16x8x8x8 configuration(Without M.2), its now running @ 16x8x8x4.I tried looking into the bios to see if I can change the port speed, nope.I also looked at Gpu Post under bios, only 3 Vga's are detected, the last one is...

89027

Z590-E Thunderbolt Connection

I need to be able to connect to thunderbolt on my z590-e motherboard. Will any thunderbolt expansion card work or is there a specific kind I need?This is a custom build from NZXT I am upgrading. I am new to building, please pretend I don't know anyth...

AMD or Intel

I know this is a touchy subject and is basically based on personal preference but I am thinking about going over the fence to AMD. I have preferred Intel for years, but see a lot of good reviews regarding AMD. I currently have a X299 system and was l...

mwr1203 by Level 8
  • 2570 Views
  • 4 replies
  • 0 kudos

ASUS GL553VD Laptop and ASUS VG248QE Monitor refresh

Hello,I own an ASUS GL553VD Laptop and ASUS VG248QE Monitor 144hz, I already know I need a Displayport cable in order to make my monitor run 144hz, but I'm currently running it on a HDMI 2.0 cable and it has 60hz refresh, my 2 GPUs are Intel HD 630 G...

imxet by Level 7
  • 1379 Views
  • 1 replies
  • 0 kudos

Rog strix Z490 E-gaming. realtek control panel.

Hello to everyone,I'm looking for the old sound panel of the motherboard I use.I tried 10 drivers but could not find the driver with the old panel.my operating system win 10 X64.I am looking for the driver in the second picture I added.I hope anyone ...