Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

DRAM Stability - Methodology & Tools

Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...

Silent_Scone_0-1739425315162.png Silent_Scone_0-1739253034190.png ezgif-3242b6279bacca.jpg

New Hardware Set-up Advice for x570-E + 5600x

Recently purchased some new parts for my PC upgrade and im just trying to make sure everything is compatible and im not missing anything that may cause issues or decreases in performance. I did not do a BIOS update but everything loaded fine but curi...

Why Must I Press the Start Button?

Hello:I have just upgradad my mobo to a CROSSHAIR Hero VIII (wi-fi) and I am confused. I had a Hero VII and it would turn on normally. With the VIII, in order to turn it on, I must press the Start button on the mobo to start it! Am I missing somethin...

Compatible mobo 4x8GB RAM at 4000MHz

• Mobo - Asus Strix X570-F• CPU - AMD Ryzen 9 5900x• GPU - Asus TUF Radeon 6800XT• RAM - Corsair Vengeance RGB PRO 4x8GB 4000MHz C19 (CMW32GX4M2K4000C19)• CPU Cooler - Corsair H115i Elite Capellix• Fans - 5x Corsair QL140 + 3x QL120• Case - Corsair 6...

APZX2J by Level 7
  • 1015 Views
  • 1 replies
  • 0 kudos

Need Advice on new gaming PC - Keep or replace Ram ?

Hi AllI have just recently built a new PC and come across an issue with the ram not running at the stated speed of 4000 Mhz. Asus technical team have advised me that the ram i have bought is not on the QVL list:-CMK32GX4M4K4000C19 = Tested and on the...

Asus Prime x570-p SVM with DOCP issue

Although I’ve been working with and building PCs since the early 2000’s, this is the first new motherboard, CPU, and RAM that I’ve bought since 2013 and some things have changed since then. So it’s quite possible that this is something stupid I just ...