Hi thereI'm just wondering if it is recommended to use the CPU_OPT for the second CPU Fan or if I just can connect both CPU Fans with a Y-cable on the CPU_FAN header?Is there a difference?Thanks & regards
Hi All,I've had my ROG laptop since 2016. Completely stock. I would like to upgrade to a newer/faster WiFi card.It's currently running an Intel Dual Band Wireless-N 7260.Any and all recommendations would be greatly appreciated.Thanks,Gordon
From the specification I checked, PRIME Z590-A supports 3200 RAM without Overclocking it.I initially purchased DDR4 3600 RAM (was a good deal) and PRIME Z590-A showed it running as 2666Mhz. So then I purchased DDR4 3200 RAM and it still showing ru...
So I got the Aus TUF monitor VG27WQ, I installed the driver from the download page, which comes with a color profile. All chromium applications display bad washed-out colors. Edge, Steam, Spotify... even Microsoft Photos app.The workaround is to enab...
If you are running a Z490 or Z590 motherboard as UEFI, you don't need to use a FAT32 configured USB drive to install on that system. A GPT configured drive with one NTFS partition and the install files copied over will work. Both boards I have tes...
Hello ROG Fam,*I recently built a new desktop PC, to replace a 12 year old system.Specs:5800x 360mm AIO CPU Cooler Corsair h150i Elite Cappelix*32GB (2x16) Corsair 3600Mhz CL18 (18-22-22-42)X570 Asus Rog Crosshair VIII Hero (non WiFi)1TB WD SN850 Gen...
Hello there,Two months ago I built a new rig and I've been having some problems with it. The m.2_2 that I use as my primary storage and games will randomly disconnect and disappear. It wont even show up on the Disk Management or BIOS. I can see in...
Hi, I cannot get my GT-AX 11000 to recognise any of my USB drives in any of the two ports, I have mainly SanDisk and WD, oh and a PNY, am I missing something ? any help would be great thanks.
When I try to install the driver, it says it can't find it and tells me to plug it in and run the driver again.I tried installing it both before and after I cloned the drive and running Win10 from the SSD.I also tried installing the firmware update ...
I have just upgraded from a Strix X299 & 7820X to a Strix Z590E & 11900K. When the system boots from cold, it starts for about 2-3 seconds, stops, then restarts and boots normally. This issue only happens when the PC has been switched off at the plug...
