cancel
Showing results for 
Search instead for 
Did you mean: 

3603 Bios and loss of Boot Drive

what_about_me
Level 7
Hello

Well everything was going well until I felt the bios needed updating as the version I had was quite old. Well doing the USB in the first USB BIOS Flashback port and pressing the USB BIOS Flashback button everything seemed to work well, well that's what I thought. The light flashed for some minutes and finally went out and well what can I say well it was done, I allowed the computer to reboot a few times that seemed ok, then it came up with all done press the F1 key to setup bios. Sounded good to me. Pressed F1 and Choose the F11 key to EZ Tune the settings. then went to save the setting and exit the bios setup. Well the computer went thru the restart routine and brought me back to the Bios Setup. (hmmm) well I choose to check the settings and finding No bootable Drive. What the F#%^! It worked well before and now the drive exist and I can read it But can not boot from it.

Can you help with some ideas on how to fix this.

thank you*
362 Views
1 REPLY 1

Erwin05
Level 10
After you flashed the bios and after u press F1 u have to press F5 1st for the default settings.