ROG Ally X - Doom + Doom II strange Trigger behavior

[TH_Tech1]

I am having some strange behavior with my new ROG Ally X and the Doom + Doom II (the recent Bethesda release in 2024). The Right trigger rarely will NOT register in Doom + Doom II while I'm holding the trigger down, and sometimes it will rarely register even when I'm not pressing it. I've tried calibrating the triggers and changing the sensitivity settings, with the exact same outcome.

I also fired up the older Bethesda Doom II release on the ROG Ally X, and no issues there. Only seems to be in this new version recently released.

Lastly, tested this on another identical ROG Ally X and it had the exact same issue.

[Anbby_ROG]

Hi @TH_Tech1 ,

Please tried removing ASUS System Control Interface v3, uninstalling Armoury Crate SE using the uninstall tool, and then reinstalling ASUS System Control Interface v3 version V3.1.34 and Armoury Crate SE to see if there is any improvement?

If the issue persists, please enable the log recording function in Armoury Crate SE before starting the game. Record a video of the issue occurring and save the log. Provide the following information via private message so I can forward it to the technical team for further analysis. Thank you.

• Serial Number:
• BIOS Version:
• Windows Build Version: (Settings - System - About)
• Graphics Driver Version:
• Game Name Where Issue Occurs: Doom + Doom II (the recent Bethesda release in 2024)
• Have you tested other external controllers?
• Armoury Crate SE > Settings > General > About > Service Version > Check Button (Copy all content):

[TH_Tech1 · Accepted solution]

Hi - updated to BIOS #308, and seems to have fixed the issue.