iOS 13 adds support for WPA3. None of ASUS’s routers support WPA3 yet. What gives?
Also, can you mix AX and AC devices on a network? Or will this degrade performance? I have a tri-band router and wonder if I should reserve one of the bands for only AX devices.*
There has been a beta firmware for the AX1100 that had WPA3 but it was taken down (Info SNB forums) AX and AC work with one another on the 2.4 or the 5Ghz channels, I use both with no problems, AX is really fast, for gaming its amazing.
Bartman wrote: There has been a beta firmware for the AX1100 that had WPA3 but it was taken down (Info SNB forums) AX and AC work with one another on the 2.4 or the 5Ghz channels, I use both with no problems, AX is really fast, for gaming its amazing.
Note that the ASUS AX88U got a beta in August (before the question was asked). And is now the only Home router that is certified as WIFI 6 and WPA3. The GA Firmware released in November includes the Support.
I lot of us are hoping they will go back and put up a release for AX11000. And for some of their new AX routers.
tns49 wrote: Note that the ASUS AX88U got a beta in August (before the question was asked). And is now the only Home router that is certified as WIFI 6 and WPA3. The GA Firmware released in November includes the Support.
I lot of us are hoping they will go back and put up a release for AX11000. And for some of their new AX routers.
Asus has been reallllllly slow with firmware updates for the GT series of routers.
