PORT INFORMATION INACCURATE DISPLAY

[hiroworx]

I feel like this happened recently from a firmware upgrade.

Anyone else notice their ports status is all yellow now?  

The router seems to work fine, and I'm getting fast connections, so it seems cosmetic.

Any fix anyone know about?

I have even hooked this router up as an ai mesh node, and the master node shows its ports as "notice" and yellow, when they used to be green.

[Rooke]

Which router?  More info please.

[Saltgrass]

Sorry, I just found the display and mine show as green.  Possibly the router has a problem, whichever one it is, or the cables are not capable.

What version of Ethernet cables are you using?  You are picking up a WAN IP address?

I suppose it may also be related to where the cables are going.  If the WAN is bad, it may be causing the other two ports to have problems.

[hiroworx]

Sorry it's an rtax92u.  It seems to work fine, it's just showing the ports as "notice" and no link speed.

I am using cat5e cables, and have tried many, and even cat6. 

[jzchen]

If you click on the “i” or hover your pointer over the ports, what does it show as the concern/problem?

[hiroworx]

I confirmed this was a firmware upgrade that introduced this.

I installed the firmware just prior to the latest one (for rtax92u), and now the port information shows as green and correct.

[hiroworx · Accepted solution]

I confirmed this was a firmware upgrade that introduced this.

I installed the firmware just prior to the latest one (for rtax92u), and now the port information shows as green and correct.

Hope this helps someone else.

[hiroworx]

FW_RT_AX92U_300438822525 this is the version i downgraded to and now its fixed.