I'm using a TUF Gaming AX4200 as my main router and a RT-AC1900U as AiMesh Node.
Yesterday, after the first configuration, AiMesh was working perfectly. Today, coincidently or not, after I made some changes, iPhones can't connect to the node, presenting an error "unable to access (SSID)".
The changes I made were enabling DNS over TLS, enabling DNSSEC, changed from WPA2 to WPA2 / WPA3-Personal, disabled 11b.
I thought some of this changes could be messing with the Node, so I did a full reset to the node and made e new AiMesh setup. The setup was successful but the problem with the iPhones still remains. I have IoT devices that are able to connect to the Node, just not the iPhones.
Any ideia why?
@jzchen escreveu:
Try forgetting the SSID on the iPhones and then re-connect to the SSID...
I tried that, then it would report wrong password.
It was the WPA2/WPA3-Personal setting, iPhones don't work well with it. I've switched to WPA2, because the nod isn't compatible with WPA3, reset the node, made a fresh AiMesh setup and the problem was solved.
