i believe i am hacked. What must I do? please help

[augustus30]

i believe i am hacked. What must I do? please help

On 27august2023 a firmware updated occurred and this is logged with time tag 5may 07:05. The official ASUS GT-AXE16000 firmware is from 19april2023 (3.0.0.4.388.23012) which was already installed. Auto update is active and signature version is 2.368 2023/08/28 02:00. Current firmware is 3.0.0.4.388_23012-g1166fba.

Is this firmware update initiated by the automated restart? Or is it a hack? Wat to do?

Aug 27 12:00:35 get_ext_phy_id: 3/1/0/0
May 5 07:05:23 kernel: klogd started: BusyBox v1.24.1 (2023-04-09 11:11:46 CST)
May 5 07:05:23 kernel: Linux version 4.19.183 (gitserv_asus@bpza001bud) (gcc version 9.2.0 (Buildroot 2019.11.1)) #1 SMP PREEMPT Sun Apr 9 11:13:17 CST 2023
May 5 07:05:23 kernel: random: get_random_bytes called from start_kernel+0x9c/0x454 with crng_init=0
May 5 07:05:23 kernel: Kernel command line: coherent_pool=4M cpuidle_sysfs_switch pci=pcie_bus_safe console=ttyAMA0,115200 earlycon rootwait mtdparts=brcmnand.0:2097152(loader),264241152@2097152(image),524288@266338304(crashlog) root=/dev/ubiblock0_4 ubi.mtd=image ubi.block=0,4 rootfstype=squashfs cma=0M mtusize=1500
May 5 07:05:23 kernel: mtusize 1500
May 5 07:05:23 kernel: CCI hardware cache coherency enabled
May 5 07:05:23 kernel: bootloader version U-Boot 2019.07 (Apr 09 2023 - 12:59:44 +0800), Build: 5.04L.0
May 5 07:05:23 kernel: inMemNvramData.szBoardId GTAXE16000_2GB
May 5 07:05:23 kernel: size of sk_buff 512
May 5 07:05:23 kernel: offset of cb in sk_buff 368
May 5 07:05:23 kernel: PMC driver initcall
May 5 07:05:23 kernel: PMC driver scanning DT
May 5 07:05:23 kernel: pmc match PMC brcm,bca-pmc-3-2
May 5 07:05:23 kernel: Remapping PMC IO memories...
May 5 07:05:23 kernel: phys virt size
May 5 07:05:23 kernel: 0x00000000ffb01018 0xffffff8008db8018 0x00005080
May 5 07:05:23 kernel: 0x00000000ffb20000 0xffffff800809e000 0x00000240
May 5 07:05:23 kernel: 0x00000000ffb00400 0xffffff80080bc400 0x000005d0
May 5 07:05:23 kernel: 0x00000000ffb80000 0xffffff80080be000 0x00001000
May 5 07:05:23 kernel: pmc_init:PMC using DQM mode
May 5 07:05:23 kernel: Powering on XRDP core...
May 5 07:05:23 kernel: Toggle reset of XRDP core...
..
May 5 07:05:23 kernel: Broadcom GBPM v0.1 initialized
May 5 07:05:23 kernel: Broadcom IQoS v1.0 initialized
May 5 07:05:23 kernel: Broadcom Logger v0.1
May 5 07:05:23 kernel: /dev/bcmnet Char device registered
May 5 07:05:23 kernel: skb_free_task created successfully with start budget 256
May 5 07:05:23 kernel: ^[[0;34mBLOG v3.0 Initialized^[[0m
May 5 07:05:23 kernel: BLOG Rule v1.0 Initialized
May 5 07:05:23 kernel: Initialise system trusted keyrings
May 5 07:05:23 kernel: Key type asymmetric registered
May 5 07:05:23 kernel: Asymmetric key parser 'x509' registered
May 5 07:05:23 kernel: 3 cmdlinepart partitions found on MTD device brcmnand.0
May 5 07:05:23 kernel: Creating 3 MTD partitions on "brcmnand.0":
May 5 07:05:23 kernel: 0x000000000000-0x000000200000 : "loader"
May 5 07:05:23 kernel: 0x000000200000-0x00000fe00000 : "image"
May 5 07:05:23 kernel: 0x00000fe00000-0x00000fe80000 : "crashlog"
May 5 07:05:23 kernel: bcm63xx-hsspi ff801000.spi: spi driver using polling mode
May 5 07:05:23 kernel: brcmboard registered
May 5 07:05:23 kernel: brcmboard: brcm_board_init entry
May 5 07:05:23 kernel: Last RESET due to Unknown
May 5 07:05:23 kernel: RESET reason: 0x00000000
May 5 07:05:23 kernel: DYING GASP IRQ Initialized and Enabled
May 5 07:05:23 kernel: bcm_i2c: Error in loading module
May 5 07:05:23 kernel: Bridge Broadcom hooks registered
May 5 07:05:23 kernel: Loading compiled-in X.509 certificates
May 5 07:05:23 kernel: ubi0: attaching mtd2
May 5 07:05:23 kernel: ubi0: scanning is finished
May 5 07:05:23 kernel: ubi0: attached mtd2 (name "image", size 252 MiB)
May 5 07:05:23 kernel: ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May 5 07:05:23 kernel: ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May 5 07:05:23 kernel: ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
May 5 07:05:23 kernel: ubi0: good PEBs: 2016, bad PEBs: 0, corrupted PEBs: 0
May 5 07:05:23 kernel: ubi0: user volume: 9, internal volumes: 1, max. volumes count: 128
May 5 07:05:23 kernel: ubi0: max/mean erase counter: 111/40, WL threshold: 4096, image sequence number: 1893841268
May 5 07:05:23 kernel: ubi0: available PEBs: 261, total reserved PEBs: 1755, PEBs reserved for bad PEB handling: 40
May 5 07:05:23 kernel: ubi0: background thread "ubi_bgt0d" started, PID 118
..
May 5 07:05:23 kernel: UBIFS (ubi0:10): UBIFS: mounted UBI device 0, volume 10, name "data"
May 5 07:05:23 kernel: UBIFS (ubi0:10): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May 5 07:05:23 kernel: UBIFS (ubi0:10): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
May 5 07:05:23 kernel: UBIFS (ubi0:10): reserved for root: 935592 bytes (913 KiB)
May 5 07:05:23 kernel: UBIFS (ubi0:10): media format: w5/r0 (latest is w5/r0), UUID 2E334EBC-059F-4066-BA50-74C8756155AB, small LPT model
May 5 07:05:23 kernel: UBIFS (ubi0:11): background thread "ubifs_bgt0_11" started, PID 229
May 5 07:05:23 kernel: UBIFS (ubi0:11): UBIFS: mounted UBI device 0, volume 11, name "defaults"
May 5 07:05:23 kernel: UBIFS (ubi0:11): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May 5 07:05:23 kernel: UBIFS (ubi0:11): FS size: 7237632 bytes (6 MiB, 57 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
May 5 07:05:23 kernel: UBIFS (ubi0:11): reserved for root: 341850 bytes (333 KiB)
May 5 07:05:23 kernel: UBIFS (ubi0:11): media format: w5/r0 (latest is w5/r0), UUID 7AF1F79B-F625-4D9E-80F4-3EF60DD56E0D, small LPT model
May 5 07:05:23 kernel: UBIFS (ubi0:13): background thread "ubifs_bgt0_13" started, PID 259
May 5 07:05:23 kernel: UBIFS (ubi0:13): UBIFS: mounted UBI device 0, volume 13, name "jffs2"
May 5 07:05:23 kernel: UBIFS (ubi0:13): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May 5 07:05:23 kernel: UBIFS (ubi0:13): FS size: 51171328 bytes (48 MiB, 403 LEBs), journal size 2539520 bytes (2 MiB, 20 LEBs)
May 5 07:05:23 kernel: UBIFS (ubi0:13): reserved for root: 2416947 bytes (2360 KiB)
May 5 07:05:23 kernel: UBIFS (ubi0:13): media format: w5/r0 (latest is w5/r0), UUID 4EE0F25E-238D-4EBE-BEC1-53A2767B513B, small LPT model
May 5 07:05:23 kernel: wlcsm: module license 'Proprietary' taints kernel.
May 5 07:05:23 kernel: Disabling lock debugging due to kernel taint
May 5 07:05:23 kernel: BCMLIBS loaded...
May 5 07:05:23 kernel: ^[[0;36;44mBroadcom MPM Driver Intializing^[[0m
May 5 07:05:23 kernel: MPM: virt_base = 0xffffff800b052000, phy_base = 0x75000000, total_mem_size = 134217728
May 5 07:05:23 kernel: MPM: ebuf_size = 512, ebuf_total = 262144/262144
May 5 07:05:23 kernel: Pool[0]: alloc 1 EBUFs (512 bytes)
May 5 07:05:23 kernel: Pool[1]: alloc 2 EBUFs (1024 bytes)
May 5 07:05:23 kernel: Pool[2]: alloc 4 EBUFs (2048 bytes)
May 5 07:05:23 kernel: Pool[3]: alloc 8 EBUFs (4096 bytes)
May 5 07:05:23 kernel: MPM Pool Numbers: SKB = 0, Data = 3, DQM = 2
May 5 07:05:23 kernel: MPM Total Commands = 41/64
May 5 07:05:23 kernel: MPM: ebuf_size 1, mpm_size_log2_kb 8
May 5 07:05:23 kernel: MPM Enabled
May 5 07:05:23 kernel: ^[[0;36;44mBroadcom HW Memory Pool Manager (MPM) Char Driver v0.1 Registered <342>^[[0m
May 5 07:05:23 kernel: Broadcom BPM Module Char Driver v0.1 Registered<304>^[[0m
May 5 07:05:23 kernel: Scratch pad is not initialized.
..
May 5 07:05:23 kernel: Scratch pad is not initialized.
May 5 07:05:23 kernel: ^[[0;34m[NTC bpm] bpm_init_buf_pool: buf_top_idx:22369^[[0m
May 5 07:05:23 kernel: ^[[0;34m[NTC bpm] bpm_init_skb_pool: skbs pool inited total 22369^[[0m
May 5 07:05:23 kernel: Scratch pad is not initialized.

May 5 07:05:23 kernel: ^[[0;36;44mTotal # of labels = 77^[[0m
May 5 07:05:23 kernel: ^[[0;36;44mInitialized fcache state^[[0m
May 5 07:05:23 kernel: Pkt HW acceleration is disabled/unavailable.
May 5 07:05:23 kernel: ^[[0;36;44mBroadcom Packet Flow Cache Char Driver v4.0 Registered<302>^[[0m
May 5 07:05:23 kernel: fc_timer_task created successfully
May 5 07:05:23 kernel: Pkt HW acceleration is disabled/unavailable.
May 5 07:05:23 kernel: Created Proc FS /procfs/fcache
May 5 07:05:23 kernel: ^[[0;36;44mBroadcom Packet Flow Cache registered with netdev chain^[[0m
May 5 07:05:23 kernel: ^[[0;36;44mBroadcom Packet Flow Cache learning via BLOG enabled.^[[0m
May 5 07:05:23 kernel: ^[[0;35m[FHW] pktDbgLvl[0x00000000937d50b8]=0^[[0m
May 5 07:05:23 kernel: ^[[0;34m[FHW] fhw_construct: ^[[0m
May 5 07:05:23 kernel: ^[[0;36;44mInitialized Fcache HW accelerator layer state^[[0m
May 5 07:05:23 kernel: flwStatsThread created. numFlwsPerPoll 584 maxFlwIdx 17535
May 5 07:05:23 kernel: ^[[0;36;44mFcache Pathstats created^[[0m
May 5 07:05:23 kernel: ^[[0;36;44mConstructed Broadcom Packet Flow Cache v4.0^[[0m

May 5 07:05:23 kernel: Detecting PHYs...
May 5 07:05:23 kernel: Loading firmware into detected PHYs: map=0x280000 count=2
..
May 5 07:05:23 kernel: 100%^[[1A
May 5 07:05:23 kernel: Reset the processors to start execution of the code in the on-chip memory
May 5 07:05:23 kernel: Verify that the processors are running: OK
May 5 07:05:23 kernel: Verify that the firmware has been loaded with good CRC: OK
May 5 07:05:23 kernel: Firmware loading completed successfully: v2.2.8
May 5 07:05:23 kernel: Loading firmware into detected PHYs: map=0x20000 count=1
May 5 07:05:23 kernel: Halt the PHYs processors operation
May 5 07:05:23 kernel: Upload the firmware into the on-chip memory: file=/rom/etc/fw/longfin_a0_firmware.bin size=294708
..
May 5 07:05:23 kernel: Reset the processors to start execution of the code in the on-chip memory
May 5 07:05:23 kernel: Verify that the processors are running: OK
May 5 07:05:23 kernel: Verify that the firmware has been loaded with good CRC: OK
May 5 07:05:23 kernel: Firmware loading completed successfully: v2.2.8
May 5 07:05:23 kernel: Adjusted QGPHY: qphy_ctrl=0x00041000 ext_pwr_down=0x0
..
May 5 07:05:23 kernel: ^[[0;30;102m=== Start of 10G Active Ethernet Initialization for core 0 port 0 ===^[[0m
May 5 07:05:23 kernel: --- Step 0 powerup/reset sequence of core #0 at address 6
May 5 07:05:23 kernel: INFO MerlinSupport::_merlin_core_power_op(): START powering up Merlin Core #0 with PRTAD = 6, ln_offset_stap = 0
May 5 07:05:23 kernel: INFO MerlinSupport::_merlin_core_power_op(): Disable IDDQ
May 5 07:05:23 kernel: INFO MerlinSupport::_merlin_core_power_op(): Provide a delay of 1ms after IDDQ is de-asserted
May 5 07:05:23 kernel: INFO MerlinSupport::_merlin_core_power_op(): Disable serdes_reset and refclk_reset
May 5 07:05:23 kernel: INFO MerlinSupport::_merlin_core_power_op: assert IDDQ|RESET|REFCLK_RESET to power down Serdes
May 5 07:05:23 kernel: INFO MerlinSupport::_merlin_core_power_op(): START powering up Merlin Core #0 with PRTAD = 6, ln_offset_stap = 0
May 5 07:05:23 kernel: INFO MerlinSupport::_merlin_core_power_op(): Disable IDDQ
May 5 07:05:23 kernel: INFO MerlinSupport::_merlin_core_power_op(): Provide a delay of 1ms after IDDQ is de-asserted
May 5 07:05:23 kernel: INFO MerlinSupport::_merlin_core_power_op(): Disable serdes_reset and refclk_reset
May 5 07:05:23 kernel: Toggle Serdes Core #0 PMD and uC reset.
May 5 07:05:23 kernel: INFO MerlinSupport::merlin_core_init(): END. Core #0 with PRTAD = 6, ln_offset_stap = 0
May 5 07:05:23 kernel: MerlinSupport::merlin16_serdes_init(): Step 4. Assert micro reset
May 5 07:05:23 kernel: MerlinSupport::merlin16_serdes_init(): Step 6. Micro code load and verify
May 5 07:05:23 kernel: MerlinSupport::merlin_load_firmware(): INFO: Start to download firmware to core # 0
May 5 07:05:23 kernel: MerlinSupport::merlin_load_firmware(): Checking init_done initial value passed...
May 5 07:05:23 kernel: MerlinSupport::merlin_load_firmware(): INFO: wait 8192 comclks for ~32KB code ram initialization...
May 5 07:05:23 kernel: MerlinSupport::merlin_load_firmware(): Checking init_done passed ...
May 5 07:05:23 kernel: MerlinSupport::merlin_load_firmware(): INFO: wait 1024 comclks for 3KB data ram initialization...
May 5 07:05:23 kernel: MerlinSupport::merlin_load_firmware(): Checking init_done passed ...
May 5 07:05:23 kernel: MerlinSupport::merlin_load_firmware(): begin writing firmware to the program ram ...
May 5 07:05:23 kernel: #
May 5 07:05:23 kernel: Done.
May 5 07:05:23 kernel: MerlinSupport::merlin_load_firmware(): end writing firmware to the program ram ...
..
May 5 07:05:23 kernel: MerlinSupport::merlin_wait_uc_crc_verify(): DSC ready for command is not working; SerDes is probably reset!!! reset_state = 7
May 5 07:05:23 kernel: MerlinSupport::merlin_wait_uc_crc_verify(): uCode CRC Verify ...
May 5 07:05:23 kernel: MerlinSupport::merlin_wait_uc_crc_verify(): wait 500us for crc verify to be done ...
..
May 5 07:05:23 kernel: MerlinSupport::merlin_wait_uc_crc_verify(): CRC verification passed ...
May 5 07:05:23 kernel: MerlinSupport::merline_speed_set_core(): Step 7 Config Speed to 2
May 5 07:05:23 kernel: No option found for: "-d ML_C_VCO_10P3125", added default value 0 in index 9
May 5 07:05:23 kernel: --- Step 8 PLL/PMD setup configuration for speed 0, mode 1.
..
May 5 07:05:23 kernel: MerlinSupport::CONFIGURING FOR FORCE 1G
May 5 07:05:23 kernel: MerlinSupport::merlin_lane_config_speed(): Core #0 Lane #0 PMD Lock Speed Up programming
May 5 07:05:23 kernel: INFO MerlinSupport::merlin_lane_config_speed(): END Merlin core #0 lane #0 Initialization procedure
May 5 07:05:23 kernel: MerlinSupport::merlin_chk_pll_lock(): Checking Core #0 PLL Lock Status
May 5 07:05:23 kernel: MerlinSupport::merlin_chk_pll_lock(): PLL Locked
May 5 07:05:23 kernel: INFO MerlinSupport::merlin16_serdes_init(): END Merlin Initialization procedure
May 5 07:05:23 kernel: MerlinSupport::merline_speed_set_core(): Step 7 Config Speed to 2
May 5 07:05:23 kernel: --- Step 8 PLL/PMD setup configuration for speed 0, mode 13.
..
..
May 5 07:05:23 kernel: MerlinSupport::merlin_load_firmware(): INFO: Start to download firmware to core # 2
May 5 07:05:23 kernel: MerlinSupport::merlin_load_firmware(): Checking init_done initial value passed...
May 5 07:05:23 kernel: MerlinSupport::merlin_load_firmware(): INFO: wait 8192 comclks for ~32KB code ram initialization...
May 5 07:05:23 kernel: MerlinSupport::merlin_load_firmware(): Checking init_done passed ...
May 5 07:05:23 kernel: MerlinSupport::merlin_load_firmware(): INFO: wait 1024 comclks for 3KB data ram initialization...
May 5 07:05:23 kernel: MerlinSupport::merlin_load_firmware(): Checking init_done passed ...
May 5 07:05:23 kernel: MerlinSupport::merlin_load_firmware(): begin writing firmware to the program ram ...
May 5 07:05:23 kernel: #
May 5 07:05:23 kernel: Done.
..
May 5 07:05:23 kernel: GetRCalSetting_1UM_VERT: Skipping SW RCAL as RCAL_1UM_VERT is not defined
..
May 5 07:05:23 kernel: ^[[1m^[[34mWifi Forwarding Driver is initialized!^[[0m
May 5 07:05:23 kernel: broadcomThermalDrv ubus@ff800000:brcm-therm: init (CPU count 4 4 4 4)
May 5 07:05:23 kernel: brcm_otp_init entry
..
May 5 07:05:23 kernel: Loading wlshared Module...
May 5 07:05:23 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
May 5 07:05:23 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
May 5 07:05:23 kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
..
May 5 07:05:23 kernel: Registering Vendor80211
May 5 07:05:23 kernel: Get event_msgs error (-19)
May 5 07:05:23 kernel: failed to set WLC_E_CAC_STATE_CHANGE bit
May 5 07:05:23 kernel: dhd_attach(): thread:dhd_watchdog_thread:3c6 started
May 5 07:05:23 kernel: ^[[0;31mwfd_bind: wfd0-thrd initialized pktlists: radio 0 nodes 1032 xfer dhd_pktfwd_xfer_callback+0x0/0x8a0 [dhd]
May 5 07:05:23 kernel: ^[[0m
May 5 07:05:23 kernel: Creating CPU ring for queue number 5 with 1024 packets descriptor=0xffffff8000d36f40, size_of_entry 16
May 5 07:05:23 kernel: Done initializing Ring 5 Base=0xffffffc064498000 num of entries= 1024 RDD Base=64498000 descriptor=0xffffff8000d36f40
May 5 07:05:23 kernel: Creating CPU ring for queue number 6 with 1024 packets descriptor=0xffffff8000d36fc0, size_of_entry 16
May 5 07:05:23 kernel: Done initializing Ring 6 Base=0xffffffc0644b0000 num of entries= 1024 RDD Base=644b0000 descriptor=0xffffff8000d36fc0
May 5 07:05:23 kernel: ^[[1m^[[34m wfd_bind: Dev eth%d wfd_idx 0 wl_radio_idx 0 Type fkb:sll configured WFD thread wfd0-thrd minQId/maxQId (0/1), status (0) qmask 0x3^[[0m
May 5 07:05:23 kernel: Instantiating WFD 0 thread
May 5 07:05:23 kernel: ^[[0;32mdhd_wfd_bind: wl0 wfd_idx 0 success^[[0m
May 5 07:05:23 kernel: dhdpcie_download_map_bin: ext nvram exists, no srommap!
May 5 07:05:23 kernel: dor0: MSG Ring format set to 1
May 5 07:05:23 kernel: dhd_runner_flowmgr_init: dhd0_rnr bootmem addr<ffffff8013c54000> size<11534336>
May 5 07:05:23 kernel: dhd_runner_profile_init: profile = 3 1024/0512 2048/1024 1024/0512 0512/0512 0512/0512
May 5 07:05:23 kernel: ^[[0;33;40mdor0 TxOffl memory: Reserved<11 Mb> Needed<11 Mb>^[[0m
May 5 07:05:23 kernel: dor0: using WME AC based flowid allocation
May 5 07:05:23 kernel: ^[[0;33;40mRunner DHD PCIE: vendor<0x14e4> device<0x6715> bus<1> slot<0>^[[0m
May 5 07:05:23 kernel: Initial configuration
..
May 5 07:05:23 kernel: Backup queue configuration:
May 5 07:05:23 kernel: Backup queue configuration:
..
May 5 07:05:23 kernel: dhd_runner_profile_init: profile = 3 1024/0512 2048/1024 1024/0512 0512/0512 0512/0512
May 5 07:05:23 kernel: dor3: using WME AC based flowid allocation
May 5 07:05:23 kernel: CUR_ETHERADDR : 6
May 5 07:05:23 kernel: c8 7f 54 c3 0d 1c
May 5 07:05:23 kernel: Dongle Host Driver, version 17.10.188.6401 (r808804)
May 5 07:05:23 kernel: Compiled in drivers/net/wireless/bcmdhd
May 5 07:05:23 kernel: Register interface [eth10] MAC: c8:7f:54:c3:0d:1c
..
May 5 07:05:53 wlceventd: wlceventd_proc_event(568): eth10: Assoc 3C:7C:3F:53:57:79, status: Successful (0), rssi:-45
May 5 07:05:53 kernel: Register interface [wds3.0.1] MAC: c8:7f:54:c3:0d:1c
May 5 07:06:13 ahs: [read_json]Update ahs JSON file.
May 5 07:06:13 init: fwver: 3.0.0.4_388_23012-g1166fba (sn:R2IG5D000598WE8 /ha:C8:7F:54:C3:0D:1C )
May 5 07:06:14 WAN Connection: WAN was restored.
May 5 07:06:14 ntp: start NTP update
Aug 27 12:02:26 rc_service: ntp 3760:notify_rc restart_diskmon
Aug 27 12:02:26 disk_monitor: Finish
Aug 27 12:02:26 disk monitor: be idle
Aug 27 12:02:36 ddns: update WWW.ASUS.COM update@asus.com, wan_unit 0
Aug 27 12:02:36 ddns: Clear ddns cache.
Aug 27 12:04:13 rc_service: waitting "firmware_webs_update" via watchdog ...
Aug 27 12:04:28 rc_service: skip the event: restart_wrs.