cancel
Showing results for 
Search instead for 
Did you mean: 

Host name resolution and SMB not working on gt-axe16000

Salamankero
Level 7

Running Firmware 3.0.0.4.388_24329

Just finished installing all my devices. Went to connect to a share on a Synology DiskStation from Windows 11 (share existing before changing out the router) and it can't find the host. Tried to ping the hostname of the DiskStation, no response. Tried to manually go to the share by running: \\192.168.50.xx\ and it can't connect to the device. Host name resolution doesn't appear to be working either. The only host name I can ping is that of the routers. All other host names fail. I've done ping -a 192.168.50.xx of a device and it returns the host name with the ping. Trying pinging that host name and it fails. 

Default configuration, although I tried updating the DSN servers to manual (8.8.8.8 and 8.8.4.4) to see if it would do anything. No change. I've tried searching for the past couple of hours, but nothing is coming up. Any ideas on why I can't connect to Synology SMB shares or ping any local host names?

Any help would be greatly appreciated. Thanks!

181 Views
1 ACCEPTED SOLUTION

Accepted Solutions

Salamankero
Level 7

Ahhh fooled myself. I had forgot that I had setup some custom firewall rules on the Synology and the new router uses a different IP range. 

View solution in original post

1 REPLY 1

Salamankero
Level 7

Ahhh fooled myself. I had forgot that I had setup some custom firewall rules on the Synology and the new router uses a different IP range.