High ping after setting up MLO with GT-BE98 PRO

[jaderaso]

I have an Apex Encore and a BE98 PRO and 1gb fiber internet. I just updated to windows 24H2 and activated the MLO but during online games the ping got really bad. Before it was around 10ms and now is around 65ms. Another game is all over the place.
All drivers and firmware are updated. My Pc is the only WiFi 7 device in my network. I have an Iot network and the main network configured. 
Is that due to the early MLO development or something that I should do to improve it?

This is my first time using MLO so any tip or advice is welcome. Thanks.

[Saltgrass]

If you are running Windows, could you copy and paste the info in the wireless properties section, where it lists WiFi 7 and the lines below down to the Aggerated Link Speed?

I do not have fiber, but I thought those numbers are closer to 2-4 ms instead of 10.  I am getting 15 ms on my normal system.

Exactly which networks you need is a little in doubt, but I currently have my basic network, plus the IoT and separate MLO SSID.  

[jaderaso]

This one?

SSID: Jackdaw42
Protocol: Wi-Fi 7
Security type: WPA3-Personal
Manufacturer: Intel Corporation
Description: Intel(R) Wi-Fi 7 BE200 320MHz
Driver version: 23.90.0.2
Network band (channel): 5 GHz (40), 6 GHz (5)
Aggregated link speed (Receive/Transmit): 2161/1921 (Mbps)

Do you turn on the “MLO Fronthaul for Clients” in the main Network?

Is it better create another main network or one Guest Network Pro?

I'm going to setup up another network only for the MLO as you did.

Thanks

[Saltgrass]

Your listing looks good for a MLO enabled system.  the problem you are seeing may be in another area.

I will get back in the morning.

[Saltgrass · Accepted solution]

Have you turned on IPv6 yet, you seem to be missing some entries in that listing.

You are showing the MLO is working, so it may be fine.  I just have the extra, non-MLO, network because the firmware update put it back.

[jaderaso]

My IPv6 is off. 

I was playing with the MLO fronthaul and the guest pro MLO to see any difference but it looks the same.

I had a hard time because the main network didn't show my pc that is the MLO connection but now it's ok.

So now I'm going to use the main Network with MLO. I was testing it today and it seems that the connection is better and I didn't have any high latency anymore. I'm going to Accept as Solution.

Thank you so much for your help.