cancel
Showing results for 
Search instead for 
Did you mean: 

GT-BE98 smart connect rules do not save

Doodle
Level 9

I have tried to change the smart connect rules in the router so that the capabilities make sense, in other words changed all to "all" iso the current selection. After saving, the default values return as per the following screenshot

Doodle_0-1706537552458.png

Again a firmware bug or do I do something wrong?

472 Views
1 ACCEPTED SOLUTION

Accepted Solutions

Doodle
Level 9

Problem solved in new firmware 3.0.0.6.102_33570

View solution in original post

6 REPLIES 6

Saltgrass
Level 13

If you feel you need to make changes to the default settings, could you tell us why?

It appears the default settings are based on signal strength, what would you prefer to use? 

Maximus Z790 Hero,
Intel i9-13900k
Intel BE200

I tried to change the connect rules so that my phone timely switches from wifi 6 to 6e. 

I also found out other people have the same issue on the router elsewhere on the internet. I reported the bug to Asus

OK, I will look regarding such an issue.  As to why it is not holding the new settings, my best guess would be that some setting was not allowed.  Perhaps you could make a small change and see if it would stick.

You can uncheck one or more of the radios in the page prior to the one you show.  Right now, for some reason, neither of my 6 GHz radios are listed in those options.

Maximus Z790 Hero,
Intel i9-13900k
Intel BE200

Doodle
Level 9

Problem solved in new firmware 3.0.0.6.102_33570

th3raid0r
Level 7

Okay, now do the RT-BE96U which has the exact same problem...

Please?

MerlinTorp
Level 7

Thanks for letting us know how you resolved the problem.