Gt-axe16000 Firmware version 3.0.0.6.102 problems

[troubleshooting]

New firmware issues. 1. Guest network pro connect to network, but not to internet with the subnet as main network disabled, not selected.

2. AiCloud FTP Sync Not working. Not synchronizing. Status connection says "WAITING" when click WAITING is says "there is no record "

3. FTPS Server in FTPS mode not working. Try different app to test it does not work. I hope anybody can fix these problems since asus does not care.

[johnaray]

I have the same issue....neither of my GUEST networks on my AXE16000 will allow any internet connection.  I tried deleting them & reconfiguring them manually again, but no change.  I tried almost all options  by themselves as well, but didn't make any difference.

[Indigian]

Guest network pro worked ok for me,had Internet.

Wifi6E went a bit awry and had to reset and start over.

[Indigian]

---

@Indigian wrote:

Guest network pro worked ok for me,had Internet.

Wifi6E went a bit awry and had to reset and start over.

---

Well that was short lived.

Wifi is flakey in all departments.

Back to old version........

Well that wasn't good,it carried over some of the problems,no I didn't reset just flashed over top.

I'll have to reset and configure from scratch..............

[phyrexians]

Just to add in case Asus is working on fixes, this firmware also broke the function to use a Phone connected via USB as WAN. Router was able to detect the phone being used as modem and the phone could also detect the USB connection but the Router is unable to generate the WAN IP.

[Saltgrass]

The AXE16000 has a setting, while setting up a guest network, to allow or deny access to the intranet.   I would think denying that access would restrict access to the internet.  Possibly the same as putting it on a separate subnet.

If you look on the support download site, you can find a page of FAQs which may help. 

My AXE16000 is not in service, so I cannot test.  I did just see a problem setting up FTP, but I don't have much experience.  Microsoft is increasing the security on Windows 11 which may have an effect on some operations.  The latest firmware may have some type of adjustment for this.

All I know about the phone situation is it has to be ab Android version.

[jzchen]

@Saltgrass Guest networks should allow connection to the internet, and usually exclude intranet access.  I had trouble with this in the early MLO iterations because all WiFi clients connected to Legacy Network has no access to intranet LAN printers on my network.  The new toggle that allows intranet access makes me reconsider trying MLO again, even though I only have a single WiFi 7 phone....

[109fire]

My issue is using the web gui.  Network map and wifi settings freeze it up and I have to manually reboot.  Also the internet speed does not work on android app or web gui.

[Indigian]

I can't because I rolled back but if any one is still using this then submit feedback,maybe they can fix it.

[bv6977]

I was able to get guest wifi networks reconfigured and those work fine. However I have random unresponsiveness from the router which will last  until after 2 or 3 reboots. It will come up for a short time, be pingable but will stop responding to pings and the webui. The entire network goes down. Going to do a hard reset and reconfig today. If it doesn't fix the issue then its a roll back to 3.0.0.4 firmware which worked fine.