Hi all,ASUS ROG is requesting our best suggestions for ROG product improvements. As a moderator I won’t have the ability to implement your suggestions but I will be picking some of the best to highlight for the ROG team so they know what matters to u...
Hi I just upgraded my internet to 4gbps speed from the ISP. It comes into my house via a fiber cable and a Nokia ONT XS-010X-Q connects with the ISP. This device has a 10GE output port. The ISP also gave a router, but it drops the WiFi quite often an...
My GT-AC5300 emits unstable 2.4 GHz signals. I cannot say whether it's a hardware defect or an issue with firmware (I've updated to the latest one: 3.0.0.4_384_81686). The signal from the router looks like at the following picture:https://drive.googl...
My gt-axe16000 tries to connect to various .compute.amazonaws.com servers on port 8883. What is that for?
When I was using the AXE16000, I could specify 5G_1 or 5G_2 for the backhaul channel. Since the Be98 Pro has two 6 GHz radios and only one 5 GHz radio, it appears the option to designate either 6G_1 or 6G-2, is not present. If you notice in the a...
Hi, I have an ASUS RT-AC5300 router and a couple of other ASUS routers (RT-AC88, RT-AC-68 via Ethernet) in AiMesh. About three to four times a month the entire network goes down. Simply powering the RT-AC5300 off and then on again restores the netw...
Hello,I tried upgrading my GT-AXE16000 firmware from version 3.0.0.4.388_23012 to version 3.0.04.388_24329 and encountered several issues.No Ethernet connected devices are able to ping the routerI am able to connect to the WIFI, but it drops packetsM...
Hi,I would like to know if TUF GAMING AX6000 support SNMP since I want to use that feature. If there is, it would be helpful to guide me on how to setup SNMP in this router. Thanks in advance.
After further troubleshooting this issue, I changed the WiFi 6 SSID so all 3 radios should broadcast separate SSIDs... after resetting and re-configuring the node, it started broadcasting the AXE11000's 6 GHz WiFi SSID as the node's 5GHz SSID but as ...
I've set up a PiHole with Unbound to filter DNS traffic, but some devices like Fire TV and Google Home are still using 8.8.8.8 instead of the PiHole's DNS. I've configured my router to use the PiHole as its primary and secondary DNS, but this hasn't ...
Hi all, newbie here, please be patient with me. I have a "weekend-warrior" level knowledge of tech stuff, but I'm no networking expert. Otherwise I probably wouldn't be asking these questions… I cannot get my current configuration to provide my 1200m...
