cancel
Showing results for 
Search instead for 
Did you mean: 

Strix G16 2023 G614JV usb c displayport alt mode max resolution + hz

wotwotwot
Level 9

what are the max capabilities of this port ?

what displayport protocol does it use ?

why is none of this information available in the manual or specs ?

displayport 1.4 ? max supported resolution + hz ?

thanks

1,818 Views
2 REPLIES 2

wotwotwot
Level 9

from the manual

Notebook PC E-Manual27
USB 3.2 Gen 2 Type-C®/DisplayPort/
Power Delivery combo port
The USB 3.2 (Universal Serial Bus 3.2) Gen 2 Type-C® port
provides a transfer rate of up to 10 Gbit/s and is backward
compatible to USB 2.0. Use a USB Type-C® adapter to connect
your Notebook PC to an external display. Connect a power
source rated 20V/5A to charge the battery pack and supply
power to your Notebook PC.
NOTE: Transfer rate of this port may vary per model.
WARNING! The adapter may become warm to hot while in use.
Do not cover the adapter and keep it away from your body while
it is connected to a power source.
IMPORTANT!
• It may take longer to fully charge your Notebook PC
through a low-voltage power source.
• To prevent any damage, use only power sources rated
20V/5A to charge your Notebook PC with the USB Power
Delivery combo port. For more information, consult an
ASUS service center for assistance

Anbby_ROG
Customer Service Agent

Hi @wotwotwot ,

The G614JV has two USB-C ports. 
 

  • One of the ports supports DisplayPort™ with HDCP 2.3, allowing for a maximum resolution of 7860 x 4320 at 60Hz and power delivery of 100W. 
  • The other port supports Thunderbolt™ 4 with a bandwidth of 40Gbps and also supports DisplayPort™ with a maximum resolution of 7680 x 4320 at 60Hz. 

This information is provided for your reference. Thank you.
 

To speed up issue identification, please provide the product model, BIOS, and driver versions, along with the troubleshooting steps you've already tried to avoid redundant checks.

⚠️ DM are for collecting personal information only. For technical assistance, please post your issue in the discussion thread so everyone can help and share insights! Thank you for your understanding! 🙂