I am sorry if this has already been answered somewhere, Have a G14 from 2024 and when i am going to the manual mode, to set thermal targets for the GPU and power limits for the CPU (NO overclock for the GPU sliders are set to 0) I try to apply the manual mode and it shows a warning saying any damage is my responsibility? The turbo on the CPU is so aggressive that it just keeps running at 85-90 degrees in perf mode. Does not even obey the maximum processor state setting to turn the boost off.
Thank you for bringing up this issue.
The warning window is intended to remind gamers that adjusting parameters may carry the risk of harming your hardware, and it also provides information on how to perform recovery procedures.
[Gaming NB/DT] Armoury Crate Introduction (Ver5.0) | Official Support | ASUS Global
