Gaming Notebooks
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Zephyrus G16(GU605CR) No output on right type-c port

I'm trying to connect my G16 to external monitor with a type-c to dp cable. The left type-c port works fine, but the monitor does not get detected when using the right type-c port.  However, the right port does detect and function normally with other...

PG77 by Level 7
  • 308 Views
  • 4 replies
  • 0 kudos

Resolved! Help found driver SmartAMP Cirrus 747

Hello. I'm asking for G16 G18 Strix Scar (2023) laptop owners. Could you try to find an older version of the Cirrus driver on your drive that didn't have the _1 prefix and share it on the forum? It seems like this should help restore the amplifier's ...

driver_reload-2.png SmartAMP_Cirrus_DCH_ROG_Cirrus_J_V23.26.47.747_31671_1-2.png

Brief click when fan turns on TUF A18

Hello - any idea what causes a brief click noise to occur when laptop fan turns on?    Per tech support this is normal:"Thank you for contacting ASUS Support regarding the brief ticking sound when your laptop fan starts. Based on our discussion, this...

Big-e by Level 7
  • 227 Views
  • 3 replies
  • 0 kudos

ROG Strix G18 2025, Did I Make A Mistake?

So I bought a ROG Strix G18, (I9 H275, 5070TI, 2TB SSD) from Costco for $1,9990. I use it mainly for music production, a little Photoshop work and only occasional gaming when I want to relax. But after seeing all the posts with dead and dying machine...

Resolved! ROG Strix G16 MOTHERBOARD Burnt Issue

Recently, my ASUS ROG Strix G16 laptop experienced a serious motherboard failure due to what appears to be an internal burnout issue. The laptop, which was functioning normally before the incident, and one day i shut down and it refused to turn power...

TWEN7Y by Level 8
  • 2138 Views
  • 14 replies
  • 2 kudos

Asus ROG STRIX G16 motherboard burnt near fan issue

Hello Asus service team,I have experienced the same issue in my Asus rog strix g16. I purchased this laptop in dec 2023.My laptop was working during last use and i shutdown properly. However, next day it refused to start. I took it to the engineer an...