04-17-2023 06:50 AM
Firmware version 9.0.0.6.102.4856 on my ASUS GT-AXE16000 router.
I would like to suggest some improvement for setting MAC address filtering.
Currently, I can select the band 2.4GHz/5GHz-1/5GHz-2/6GHz, my phone once connects on 5GHz and once on 2.4GHz (if I am far from the router), so I need to set 2 or 3 times the same device allowed to use wireless network on different frequencies.
Setting MAC filtering for each frequency is very time consuming.
Therefore, I suggest that you introduce:
1. One list of MAC addresses allowed/rejected for all frequencies (or optionally a checkbox "for all frequencies" or for a specific frequency)
2. The possibility to import such a list of devices, e.g. from the list of devices defined in the manual assignment of IP addresses (without DHCP) - not all devices are in this moment connected to the network, and as I gave an example (my phone is connected once on one frequency and once on the other).
3. Adding the ability to export the list of devices, for example from the list of manual assignment of IP ades (just as there is an export option in Network map/Client/List view)
4. Why in the view (Network map/Client/List view) I can't select to copy (Ctrl-C) MAC adresses of any device? It should be possible in the context of Customer Journey improvement.
Solved! Go to Solution.
04-23-2023 11:57 PM - edited 04-24-2023 12:04 AM
Hello, @ra_dzik.
After confirmation by relevant departments, the wrong description problem you mentioned will be fixed in the non-beta version released in the near future. Please update and confirm again at that time.
For the other items you mentioned, we appreciate the feedback, and it will be reflected in the relevant units for reference evaluation.
Thank you for supporting ASUS products.
04-17-2023 08:24 AM
and some wrong description about frequencies is in information window when I set MAC address filtering see below..
04-23-2023 11:57 PM - edited 04-24-2023 12:04 AM
Hello, @ra_dzik.
After confirmation by relevant departments, the wrong description problem you mentioned will be fixed in the non-beta version released in the near future. Please update and confirm again at that time.
For the other items you mentioned, we appreciate the feedback, and it will be reflected in the relevant units for reference evaluation.
Thank you for supporting ASUS products.
04-26-2023 03:02 AM
Hello Jiaszzz_ROG,
Thank you for your reply.
I don't want to go back to the previous version - I prefer to stay with Beta.
Nevertheless, if you were looking for a reliable and meticulous tester for your new products, I am ready to take the challenge 🙂 because it is my passion.