I want to use VLAN on a BE98 Pro router to segment a subnet on a specific port.
The idea is isolate a web server from the rest of the network.
Can I use a separate subnet address (e.g., 10.1.2.0) with hosts on this subnet?
How do they contact the router whose address is 10.1.1.1 in order to access the internet?
Where do I specify the router address in the VLAN configuration? No DHCP server is running on the subnet.
Is there a way for hosts on subnet 10.1.1.0 to connect to the isolated host using its IP address (10.1.2.5)? or do they have to reach the host via its external address?
