Intel (R) Ethernet Controller (3) I225-V #3 Code: 10

[Jeqkals]

Motherboard is Asus Rog B550-A.

I tried disabling it, removing it and updating the driver but none of these worked.

https://imgur.com/a/Z38gaGC

In the properties it says: (the image is after the driver update)

The decive can't start (code:10)

STATUS_DEVICE_POWER_FAILURE

[Jeqkals · Accepted solution]

I found a fix!

1. Turn off the computer for like 5 minutes
2. turn off the power supply then unplug it
3. press the turn on button on the computer wait a few seconds
4. press it again wait a few seconds again
5. then press it for 5 second
6. Plug it back and turn on normally and it should work again.