Using the T-sensor header to monitor temperature of my case.
I am mainly using mainly Aida64 to monitor temps but also HWinfo & Armoury Crate to check accuracy.
Lately, after updating BIOS to version 1203, the temp readings are off. maybe it's the BIOS update, maybe it's not. I simply don't know.
It is off in all of the monitoring software (Aida64, HWinfo, Armoury Crate) which leads me to believe it's a MB/sensor issue, not a software reading issue.
Have a digital thermometer in the case to confirm discrepancy as well.
I have changed the sensor cable to eliminate bad/damaged cable possibility.
I know I can offset the temp in Aida64 by the discrepancy (in the 'correction' section) but the difference doesn't seem to be constant at all. The reading is kind of stuck at 24-25. If I rub the end of the sensor cable, temps do come up but very quickly come back down to 24-25.
If you've come across the same issue, please let me know workable solutions.
Thank you
