STRIX X870-I Solid Yellow LED Status light

[edgedemon]

Hi All

Hi Everyone

 Currently I cant get this board to post, I have a solid yellow status LED the moment I turn on power. This LED appears either on the hive when connected or on the mobo LED status light by the ADD-GEN2 header.  From googling I understand this to mean a RAM issue.
Initially I built the system completely before powering it on, but in an effort to solve this I have stripped the system down to its absolute bare minimum.
I have the following connected to the motherboard

AMD 9950X
ATX Power
CPU 12V power
CPU FAN
AIO Pump
1 or 2 sticks of RAM
I have removed the gfx card, all storage, the extra add on card and all USB and front panel IO
The moment I turn on the power I instantly get the yellow status LED appear and it stays until the machine shuts down after around 30-40 seconds.
I have q-flashed to AMD AGESA PI 1.2.0.2
Reset CMOS
I have dropped down to one stick of RAM and tried it in both slots, and then swapped it for the other stick and repeated the process

In addition I have also bought another set of RAM which also gives the same status LED warning as soon as power is turned on.

I have run out of things to try to solve this.
For reference the sets of RAM are
https://www.gskill.com/qvl/165/393/1665020366/F5-6000J3040G32GX2-TZ5N-QVL 
https://www.corsair.com/uk/en/p/memory/cmh48gx5m2b6000c30/vengeance-rgb-48gb-2x24gb-ddr5-dram-6000mt... 

[Jiaszzz_ROG]

Hello @edgedemon 

Thank you for reaching out to us.
Based on your description, after pressing the power button, the DRAM Q-LED indicator lights up, and the system fails to boot after 30-40 seconds without starting up. You have also tried updating the BIOS, clearing CMOS, testing with a single memory module, and performing minimal hardware configuration, but the issue persists. 
However, the memory you have installed, F5-6000J3040G32GX2-TZ5N, is not listed on the ROG STRIX X870-I GAMING WIFI's Memory QVL. 

In addition to ensuring that all hardware, including memory, is correctly installed, we recommend cross-testing with memory kits from the QVL to help rule out potential compatibility issues with the memory.
Please refer to [Motherboard] How to query (CPU/memory) QVL List? and purchasing and installation guide if needed.

Thank you.

[Sciprox]

I have exactly the same issue and using the memory off the approved memory list.

have cleared the CMOS, tried one stick. No luck. I feared buying Asus based on recent bad reviews. I see why now.  

Trident Z5 Neo RGB 64GB (2 x 32GB) DDR5-6000 PC5-48000 CL30 Dual Channel Desktop Memory Kit F5-6000J3040G32GX2-TZ5NR

[Jiaszzz_ROG]

Hello @Sciprox 

Thank you for reaching out to us.
We've noticed that you have posted the same content in another thread: STRIX X870-I Solid Yellow LED Status light, and we have updated our response.
Kindly suggest avoiding duplicate posts or comments to prevent any potential discrepancies or misunderstandings.
If there are any updates or additional information, please refer to that thread. 

Thank you.