[Solved ] - Whea Logger Event ID 17 PCI\VEN_8086&DEV_A74D&SUBSYS_88821043&REV_01

[FrankPlawetzki]

Also have the Z790 F Gaming WiFi and 2tb 990PRO nvme SSD and had the same errors logged in event viewer.

I wanted to answer to the original thread, but it was closed: https://rog-forum.asus.com/t5/gaming-motherboards/whea-logger-event-id-17-pci-ven-8086-amp-dev-a74d-...

Those errors have been solved by the newest firmware update Samsung provided for the SSD: Version 4B2QJXD7

Installed it via the Samsung magician tool.

@emred @AngrySvarog @LowRezGuy FYI

[AngrySvarog]

Thank you @FrankPlawetzki. Confirmed fix: >12k events in past 24hrs before installing the latest Samsung firmware (via Samsung Magician); now 0 events since.

[emred]

WOW thank you so much man I did reply the latest bios post for the is this issue got fixed or not ı thought it was asus issue. I'll try this and will reply..

[emred]

Firmware Update didn't fix the issue for me :'))

[FrankPlawetzki]

Do you have the same 990 Pro SSD?

[emred]

Yes 990Pro 2TB

[Jose_Antonio]

I have the same problem, a ROG Maximus Z790 Extreme with 2 Samsung 990 Pro 2 Tb installed on M2_2 and M2_3, both with latest firmware 4B2QJXD7, and Whea Logger Event id 17 fills the system event log. I have also two NVME on the DIMM.2 slot, a Kinsgton SKC3000 4 Tb and a Corsair MP600 Pro XT 4 Tb, both also with latest firmware from their vendors. All four NVME work without problems, but the multiple warnings remain in event log.  

[FrankPlawetzki]

In my system the Samsung 990 Pro is in the first M2 slot below the CPU (M2_1). Did you fully power down the system after the firmware update? Maybe you could try to re-apply the firmware update, in case the magician tool allows that.

[Jose_Antonio]

Hi Frank. I cannot use the M2_1 slot because I use the three PCIExpress slots, and PCIEX16(G5)_2 and M2_1 cannot be used at the same time. Yes, I did fully power down after firmware updates, that where done one at a time with fully power down. Magician tool does not allow to re-aplly the firmware update. It only shows they have the last firmware update (4B2QJXD7). Thanks.