Hello everyone
I just built a new computer with a ROG STRIX Z890-F GAMING WIFI, Ultra 7 265K, Corsair 6400Mhz (2x32GB) and a NVIDIA Quadro RTX 5000 graphics card.
When I connect the monitor to the Quadro and try to start the system, the white VGA LED on the mainboard lights up and the system won't boot. If I disconnect the DP cable at this moment from the Quadro and connect it directly into the motherboard's DP, the system boots and the VGA LED goes out. The Quadro is visible in the Q-Dashboard, and I was able to install the driver in Windows. However, it remains disabled in Device Manager with Code 43. I plugged it into a different PCI port, but that didn't help.
Any idea? Thank you so much for help.
