12-16-2023 05:05 PM
I have tried pretty much everything that was suggested from here and on other sites including Reddit to remedy this issue. I have just installed this new board with memory, processor, and GPU all transferred from MSI pro z690-a ddr4. The system turns-on and I can use power and reset button on a case but the VGA light is on (white) and boot light is on (green) both solid and doesn't go further and doesn't post at all. I tried mashing F2 and/or DEL upon boot to force a post. I have tried with and without external GPU. Tried HDMI and DisplayPort. I have upgraded the BIOS. I have tried alternating the slots of RAM with one and two sticks. Anyone has any suggestions? Below are the specifications:
Processor: i5-12600KF
Memory: Cosair Vengence Pro 2x16GB DDR4 DRAM 3600MHz
Videocard: RTX Nvidia 3070 TI
Powersupply: MPE-7501-AFAAG
M.2: Crucial PCIe 3.0 2280 4TB
Solved! Go to Solution.
12-18-2023 02:35 PM
After much struggling I figured it out. My video card wasn't working so I couldn't see the post although I knew it was happening. The processor I had did not have integrated GPU so I couldn't see the post either way. I ended up buying a new processor on a whim, bam it worked. I then very thoroughly cleaned my video card and ****** it worked. At least a nice shiny CPU was all that I spent money on.
12-18-2023 02:35 PM
After much struggling I figured it out. My video card wasn't working so I couldn't see the post although I knew it was happening. The processor I had did not have integrated GPU so I couldn't see the post either way. I ended up buying a new processor on a whim, bam it worked. I then very thoroughly cleaned my video card and ****** it worked. At least a nice shiny CPU was all that I spent money on.