Rog Strix X870 Gaming Wifi - enabling Turbo Game Mode causes freezing of the Bios

[FulvioO]

Hi,

Just upgraded the BIOS to Ver. 0606.

As per subject, enabling the new Turbo Game Mode options causes the total freeze of the Bios, right after pressing ok to the notice screen, who advises that the gaming performance can be limited to certain games.

It does not look that this is caused by other settings, since it happens every time, no matter if is a "fresh" configuration, or one where I already changed something.

Can you please suggest how overcome this problem?

My setup is

- AMD 7800x3d

- 2x32 G.Skill memories, 30CL

- Russ TUF 4080 Super.

Thank you!

[OettiM]

Hi, I habe the same issue. Freeze after trying to apply turbo game mode with default and my custom settings.

Config:

- B650E-I Gaming Wifi, Bios 3057

- 7600X

- 6000 CL30 Corsair

Looking forward to fixes, Thank you!

[Badeluk7]

Hey, same issue here: 

- B650E-F Gaming Wifi, Bios 3611

- 7800X3D

[Jiaszzz_ROG]

Hello @FulvioO  and @OettiM 

Thank you for reaching out to us.
Regarding the similar issues you’ve encountered with freezing after enabling Turbo Game Mode in the BIOS, may I ask if there are any other manual BIOS settings in place, such as adjusting CPU cores or enabling EXPO/DOCP?
Please provide a complete video recording of the issue, following these steps: start recording > clear CMOS > boot up and enter BIOS > enable Turbo Game Mode to replicate the freeze > demonstrate your current troubleshooting steps > end recording.
Additionally, please share the specifications of your current PSU and the part number for your memory, as this will help us investigate further.

Thank you.

[Jiaszzz_ROG]

Hello @Daerdor 

Thank you for joining the discussion.
Could you please review my previous response and share the requested information to help us investigate further? 

Regarding the similar issues you’ve encountered with freezing after enabling Turbo Game Mode in the BIOS, may I ask if there are any other manual BIOS settings in place, such as adjusting CPU cores or enabling EXPO/DOCP?
Please provide a complete video recording of the issue, following these steps: start recording > clear CMOS > boot up and enter BIOS > enable Turbo Game Mode to replicate the freeze > demonstrate your current troubleshooting steps > end recording.
Additionally, please share the specifications of your current PSU and the part number for your memory, as this will help us investigate further.

I have also DM you; kindly check your inbox at your convenience.

Thank you.

[OettiM]

Hi, thanks for the response...
Those are my current Bios settings with mainly EXPO Tweaked enabled, PPT at 85W and Undervolted by 30 mV:
The CMOS reset is another topic for me. It resets every time the computer is unplugged. I changed the battery but it is still persisting. Anyways, I am currently not able to do the reset as I am on a business trip.
Bios Settings:
Ai Overclock Tuner [EXPO Tweaked]
BCLK Frequency [100.0000]
Memory Frequency [DDR5-6000MHz]
FCLK Frequency [Auto]
Core Performance Boost [Auto]
CPU Core Ratio [Auto]
Core VID [Auto]
CCX0 Ratio [Auto]
Dynamic OC Switcher [Auto]
Tcl [30]
Trcd [36]
Trp [36]
Tras [76]
Trc [Auto]
Twr [Auto]
Refresh Interval [Auto]
Trfc1 [Auto]
Trfc2 [Auto]
Trfcsb [Auto]
Trtp [Auto]
TrrdL [Auto]
TrrdS [Auto]
Tfaw [Auto]
TwtrL [Auto]
TwtrS [Auto]
TrdrdScl [Auto]
TrdrdSc [Auto]
TrdrdSd [Auto]
Trdrddd [Auto]
TwrwrScl [Auto]
TwrwrSc [Auto]
TwrwrSd [Auto]
TwrwrDd [Auto]
Twrrd [Auto]
Trdwr [Auto]
IBUF_LPWR_MODE [Auto]
ADDR_CMD_MODE [Auto]
M_ORDERING [Auto]
S_COL_WIDTH [Auto]
MC_SVA_TRIM0 [Auto]
MC_SVA_TRIM1 [Auto]
MC_SVA_TRIM2 [Auto]
MMCM_MULT_F [Auto]
Proc CA Drive Strength [Auto]
Proc Data Drive Strength [Auto]
CPU On-Die Termination [Auto]
DRAM Data Drive Strength [Auto]
Rtt Nom Wr [Auto]
Rtt Nom Rd [Auto]
Rtt Wr [Auto]
Rtt Park [Auto]
Rtt Park Dqs [Auto]
Power Down Enable [Enabled]
Memory Context Restore [Enabled]
UCLK DIV1 MODE [Auto]
CA Tx Phase Shift Clk [Auto]
CS Tx Phase Shift Clk [Auto]
CK Tx Phase Shift Clk [Auto]
CA Rx Phase Shift Clk [Auto]
CS Rx Phase Shift Clk [Auto]
CK Rx Phase Shift Clk [Auto]
FIFO Wr En Fine Delay [Auto]
POC Sample PD [Auto]
Bank Swap Mode [Auto]
Mem Over Clock Fail Count [Auto]
Prochot VRM Throttling [Auto]
Peak Current Control [Auto]
Medium Load Boostit [Auto]
Precision Boost Overdrive [Manual]
PPT Limit [85]
TDC Limit [Auto]
EDC Limit [Auto]
Precision Boost Overdrive Scalar [Auto]
CPU Boost Clock Override [Enabled (Positive)]
Max CPU Boost Clock Override(+) [200]
Per-Core Boost Clock Limit [Auto]
Platform Thermal Throttle Limit [Auto]
Curve Optimizer [All Cores]
All Core Curve Optimizer Sign [Negative]
All Core Curve Optimizer Magnitude [30]
VRM Initialization Check [Enabled]
CPU Load-line Calibration [Auto]
Segment2 Loadline [Auto]
CPU Current Capability [Auto]
CPU VRM Switching Frequency [Auto]
VRM Spread Spectrum [Auto]
CPU Power Duty Control [T.Probe]
CPU Power Phase Control [Auto]
VDDSOC Current Capability [Auto]
VDDSOC Switching Frequency [Auto]
VDDSOC Power Phase Control [Auto]
Performance Bias [Auto]
Clock Spread Spectrum [Auto]
1.8V PLL Voltage [Auto]
Misc_ALW [Auto]
Chipset 1.05V [Auto]
Algorithm 1 [Auto]
Algorithm 2 [Auto]
Algorithm 3 [Auto]
CCD Priority Memory Activity Threshold [1070]
CCD Priority Hysteresis [Auto]
Cooler Efficiency Customize [Keep Training]
Cooler Re-evaluation Algorithm [Normal]
Optimism Scale [100]
CPU Core Voltage [Auto]
CPU SOC Voltage [Auto]
CPU VDDIO / MC Voltage [Auto]
Misc Voltage [Auto]
VDDP Voltage [Auto]
High DRAM Voltage Mode [Auto]
DRAM VDD Voltage [1.40000]
DRAM VDDQ Voltage [1.40000]
PMIC Force Continuous Current Mode [Auto]
PMIC Voltages [Sync All PMICs]
SPD HUB VLDO (1.8V) [Auto]
SPD HUB VDDIO (1.0V) [Auto]
Memory VDD Voltage [1.40000]
Memory VDDQ Voltage [1.40000]
Memory VPP Voltage [Auto]
Memory Voltage Switching Frequency [Auto]
Memory Current Capability [Auto]
Security Device Support [Enable]
SHA256 PCR Bank [Enabled]
Pending operation [None]
Platform Hierarchy [Enabled]
Storage Hierarchy [Enabled]
Endorsement Hierarchy [Enabled]
Physical Presence Spec Version [1.3]
Disable Block Sid [Disabled]
Firmware TPM switch [Enable Firmware TPM]
Erase fTPM NV for factory reset [Enabled]
Password protection of Runtime Variables [Enable]
PSS Support [Enabled]
NX Mode [Enabled]
SVM Mode [Enabled]
Above 4G Decoding [Enabled]
Resize BAR Support [Enabled]
SR-IOV Support [Disabled]
Legacy USB Support [Enabled]
XHCI Hand-off [Enabled]
USB Mass Storage Driver Support [Enabled]
USB [Auto]
U32G2_2 [Enabled]
U32G2_3 [Enabled]
U32G2_4 [Enabled]
USB_5 [Enabled]
U32G2X2_C6 [Enabled]
U32G2_10 [Enabled]
U32G1_8 [Enabled]
U32G1_9 [Enabled]
U32G2_11 [Enabled]
USB_14 [Enabled]
USB_15 [Enabled]
USB_16 [Enabled]
Network Stack [Disabled]
Device [N/A]
SATA Controller(s) [Enabled]
SATA Mode [AHCI]
NVMe RAID mode [Disabled]
SMART Self Test [Enabled]
SATA6G_1 [Enabled]
SATA6G_1 Hot Plug [Disabled]
SATA6G_2 [Enabled]
SATA6G_2 Hot Plug [Disabled]
Restore AC Power Loss [Power Off]
ErP Ready [Disabled]
Max Power Saving [Disabled]
Power On By PCI-E [Disabled]
Power On By RTC [Disabled]
Native ASPM [Auto]
CPU PCIE ASPM Mode Control [Auto]
PCIEX16 Bandwidth Bifurcation Configuration [Auto Mode]
USB Audio Controller [Enabled]
Wi-Fi Controller [Enabled]
Bluetooth Controller [Enabled]
When system is in working state [All On]
When system is in sleep, hibernate or soft off states [Onboard LED on]
Intel LAN Controller [Enabled]
USB power delivery in Soft Off state (S5) [Enabled]
PCIEX16 Link Mode [Auto]
M.2_1 Link Mode [Auto]
Chipset Link Mode [Auto]
M.2_2 Link Mode [Auto]
Primary Video Device [PCIE Video]
Integrated Graphics [Disabled]
Global C-state Control [Auto]
IOMMU [Auto]
ECC [Auto]
SMT Control [Auto]
Core Performance Boost [Auto]
L1 Stream HW Prefetcher [Auto]
L2 Stream HW Prefetcher [Auto]
L1 Stride Prefetcher [Auto]
L1 Region Prefetcher [Auto]
L1 Burst Prefetch Mode [Auto]
L2 Up/Down Prefetcher [Auto]
Core Watchdog Timer Enable [Auto]
RedirectForReturnDis [Auto]
Power Supply Idle Control [Auto]
Opcache Control [Auto]
Streaming Stores Control [Auto]
Local APIC Mode [Auto]
ACPI _CST C1 Declaration [Auto]
Platform First Error Handling [Auto]
MCA error thresh enable [Auto]
MCA FruText [True]
SMU and PSP Debug Mode [Auto]
PPIN Opt-in [Auto]
REP-MOV/STOS Streaming [Enabled]
Enhanced REP MOVSB/STOSB [Enabled]
Fast Short REP MOVSB (FSRM) [Auto]
SNP Memory (RMP Table) Coverage [Auto]
SMEE [Auto]
Action on BIST Failure [Auto]
Log Transparent Errors [Auto]
AVX512 [Auto]
MONITOR and MWAIT disable [Auto]
Corrector Branch Predictor [Auto]
PAUSE Delay [Auto]
CPU Speculative Store Modes [Auto]
SVM Lock [Auto]
SVM Enable [Auto]
Memory interleaving [Auto]
Memory interleaving size [Auto]
DRAM map inversion [Auto]
Location of private memory regions [Auto]
ACPI SRAT L3 Cache As NUMA Domain [Auto]
Disable DF to external downstream IP Sync Flood Propagation [Auto]
Disable DF sync flood propagation [Auto]
Freeze DF module queues on error [Auto]
DF Cstates [Auto]
PSP error injection support [False]
Active Memory Timing Settings [Auto]
Processor CK drive strengths [Auto]
Processor CA drive strengths [Auto]
Processor CS drive strengths [Auto]
Dram ODT impedance RTT_NOM_WR [Auto]
Dram ODT impedance RTT_NOM_RD [Auto]
Dram ODT impedance RTT_WR [Auto]
Dram ODT impedance RTT_PARK [Auto]
Dram ODT impedance DQS_RTT_PARK [Auto]
Processor ODT impedance [Auto]
Processor DQ drive strengths [Auto]
Dram DQ drive strengths [Auto]
Power Down Enable [Auto]
Disable Memory Error Injection [Auto]
TSME [Auto]
Data Scramble [Auto]
Chipselect Interleaving [Auto]
Address Hash Bank [Auto]
Address Hash CS [Auto]
Address Hash Subchannel [Auto]
BankSwapMode [Auto]
DFE Read Training [Auto]
DRAM PDA Enumerate ID Programming Mode [Auto]
TX DFE Taps [Auto]
PPT Control [Auto]
DDR Training Runtime Reduction [Auto]
Rx Burst Length [Auto]
Tx Burst Length [Auto]
RX2D_TrainOpt [Auto]
TX2D_TrainOpt [Auto]
RX DFE Taps [Auto]
MBIST Enable [Auto]
Memory Context Restore [Auto]
PCIe ARI Support [Auto]
PCIe All Port ECRC [Auto]
Advanced Error Reporting (AER) [Auto]
PCIe ARI Enumeration [Auto]
PSPP Policy [Auto]
UMA Version [Auto]
GPU Host Translation Cache [Auto]
NB Azalia [Auto]
Audio IOs [Auto]
PCIe loopback Mode [Auto]
Persistence mode for legacy endpoints [Auto]
EQ Bypass To Highest Rate [Auto]
Retimer margining support [Auto]
TDP Control [Auto]
ECO Mode [Disable]
PPT Control [Auto]
Thermal Control [Auto]
TDC Control [Auto]
EDC Control [Auto]
Fan Control [Auto]
VDDP Voltage Control [Auto]
Infinity Fabric Frequency and Dividers [Auto]
SyncFifo Mode Override [Auto]
GFXOFF [Auto]
CPU Temperature [Monitor]
CPU Package Temperature [Monitor]
MotherBoard Temperature [Monitor]
VRM Temperature [Monitor]
Chipset Temperature [Monitor]
T_Sensor Temperature [Monitor]
DIMM A Temperature [Monitor]
DIMM B Temperature [Monitor]
CPU Fan Speed [Monitor]
Chassis Fan Speed [Monitor]
AIO Pump Speed [Monitor]
VRM Heatsink Fan Speed [Monitor]
CPU Core Voltage [Monitor]
12V Voltage [Monitor]
5V Voltage [Monitor]
3.3V Voltage [Monitor]
CPU VDDIO / MC Voltage [Monitor]
CPU Fan Q-Fan Control [Auto Detect]
CPU Fan Profile [Standard]
CPU Fan Q-Fan Source [CPU]
CPU Fan Step Up [Level 0]
CPU Fan Step Down [Level 0]
CPU Fan Speed Low Limit [200 RPM]
Chassis Fan Q-Fan Control [Auto Detect]
Chassis Fan Profile [Standard]
Chassis Fan Q-Fan Source [CPU]
Chassis Fan Step Up [Level 0]
Chassis Fan Step Down [Level 0]
Chassis Fan Speed Low Limit [200 RPM]
AIO Pump Q-Fan Control [Auto Detect]
AIO Pump Profile [Full Speed]
VRM Heatsink Fan Q-Fan Control [PWM Mode]
Launch CSM [Disabled]
OS Type [Other OS]
Secure Boot Mode [Custom]
Fast Boot [Enabled]
Next Boot after AC Power Loss [Fast Boot]
Boot Logo Display [Auto]
POST Delay Time [3 sec]
Bootup NumLock State [On]
Wait For 'F1' If Error [Enabled]
Option ROM Messages [Force BIOS]
Interrupt 19 Capture [Disabled]
AMI Native NVMe Driver Support [Enabled]
Setup Mode [EZ Mode]
BIOS Image Rollback Support [Enabled]
Publish HII Resources [Disabled]
Flexkey [Reset]
Load from Profile [1]
Profile Name [oc]
Save to Profile [1]
DIMM Slot Number [DIMM_A]
Download & Install ARMOURY CRATE app [Enabled]
Download & Install MyASUS service & app [Disabled]
Special Display Features [Disabled]
D3Cold Support [Disabled]
Discrete GPU _DSM Function A [Disabled]
Discrete GPU _DSM Function B [Disabled]
NVIDIA DGPU Power Enable [Disabled]
Non-Eval Discrete GPU Support [Enabled]
Discrete GPU HPD Circuitry [OR Circuitry]
Discrete GPU's USB Port [Keep Default Setting]
Discrete GPU's SSID/SVID [Keep Default Setting]
Discrete GPU BOMACO Support [Disabled]
Processor Aggregator Device [Enabled]
Core Count Control [Enabled]
HDMI 3.0G Tx SLEW [Disabled]
CPU Frequency [0]
CPU Voltage [0]
SMT Control [Auto]
Prochot VRM Throttling [Auto]
Peak Current Control [Auto]
EXPO [Auto]
Active Memory Timing Settings [Auto]
Processor CA drive strengths [Auto]
Processor DQ drive strengths [Auto]
Processor ODT impedance [Auto]
Dram DQ drive strengths [Auto]
Dram ODT impedance RTT_NOM_WR [Auto]
Dram ODT impedance RTT_NOM_RD [Auto]
Dram ODT impedance RTT_WR [Auto]
Dram ODT impedance RTT_PARK [Auto]
Dram ODT impedance DQS_RTT_PARK [Auto]
Power Down Enable [Auto]
RX2D_TrainOpt [Auto]
TX2D_TrainOpt [Auto]
RX DFE Taps [Auto]
TX DFE Taps [Auto]
DDR5 Nitro Mode [Auto]
Infinity Fabric Frequency and Dividers [Auto]
UCLK DIV1 MODE [Auto]
Precision Boost Overdrive [Auto]
VDDG Voltage Control [Auto]
VDDP Voltage Control [Auto]
SoC/Uncore OC Mode [Auto]
SoC Voltage [0]
LN2 Mode [Auto]
VDD Misc Control [Auto]
LCLK Frequency Control [Auto]
VDDIO Ctrl [Auto]
Enable Platform PMIC Control [Auto]
VPP Ctrl [Auto]
PMIC Control [Auto]
VPP Ctrl [Auto]

[Jiaszzz_ROG]

Hello @OettiM and @Badeluk7 

Thank you for providing the relevant information.
Our engineers are currently investigating the issue, but this process may take some time.
Meanwhile, could you please provide a complete video recording of the issue via the steps below to help us narrow down the potential cause?

Start recording > clear CMOS > boot up and enter BIOS > enable Turbo Game Mode to replicate the freeze > demonstrate your current troubleshooting steps > end recording.

Additionally, please share the specifications of your current PSU and the part number for your memory, as this will help us investigate further.
Thank you.

[Jiaszzz_ROG]

Hello @Badeluk7 

Thank you for your reply.
According to the support site for the ROG STRIX B650E-F GAMING WIFI, BIOS version 3611 is not listed, and the latest available version is 3057, released on November 6, 2024.

We recommend updating to this version and clearing CMOS before enabling Turbo Game Mode in BIOS again.
If the issue persists, please refer to my previous response and share the PSU specifications, memory part number, and a video to assist us in further investigation.

Thank you.

[Badeluk7]

Hello, sorry, I informed the wrong BIOS version. Here are the correct information from CPU-Z:

[Daerdor]

Same issue here, as soon as I activate Turbo Game Mode in the BIOS the notice screen appears and the BIOS freezes.

MoBo: ROG STRIX B650E-F Gaming WiFi
Bios Update: 3057
CPU: AMD Ryzen 7 7800X3D
Mem: 6000 CL30 A-DATA