ROG Fan Controller on a Maximus Z690 Extreme

[royintexas]

OK, I am on my 2nd PC build, I am not at all sure how to connect the ROG Fan Controller. The bags with wires only have part numbers and don't say what they are for. Any help would be appreciated.

[world]

Hey Roy,

Have you checked the manual for instructions for the ROG Fan Controller?

For reference, here's what I've found on page 2-23 in the manual regarding the ROG fan controller.

[royintexas]

I have. the book shows what plugs into the Unit, but it doesn't say where to plug in the other end.

[world · Accepted solution]

Were you able to find the cables that plug into the fan controller for steps 1-3 then?

This is my understanding of what plugs into the fan controller:

Step 1: The ARGB plug connects to your RGB Header on your motherboard

Step 2: Power in cable should be plugged into your power supply

Step 3: USB cable other end should connect to a USB 2.0 header on the motherboard

Step 4: Connect your fans and RGB devices that you want to control with the controller

[royintexas]

Thank you so much. The book could do a better job of explaining that.