Q-CODE C5 with Gskill F5-6000J3040G32GX2-TZ5NR

[Shadowtracker]

When using Gskill 2x32 F5-6000J3040G32GX2-TZ5NR, X670E Strix E stops at C5 after Training the memory, but only with the Gskill ram.  When I put the Corsair Dominator Titanium 2x16 CMP32GX5M2B6000C30, it posts and boots fine...  any suggestions?

[Nate152]

Hello Shadowtracker

The issue is likely the higher capacity of 64GB with the G.Skill memory.

If it's not fully stable, you can go about stability a few ways.

1) Lower the Dram Frequency.

2) Loosen the primary timings.

3) Manually tune voltages which is what most people do when encountering instability.