cancel
Showing results for 
Search instead for 
Did you mean: 

Problem asus rog b650e-f

Besjan
Level 7

I tried 4x16 ram on my board and when I put all four sticks in the pc it shows a black screen I changed the places and nothing my rams are hynix c34 2x16gb 7200mhz and fury beast 2x16gb 6000mhz only 2 of them work

119 Views
2 REPLIES 2

Silent_Scone
Super Moderator

HI @Besjan 

Please read here regarding XMP/EXPO and mixing and combining memory kits.

https://rog-forum.asus.com/t5/technologies-explained/memory-kits-overclocking-and-what-you-may-not-k...

 

9800X3D / 6400 CAS 28 / ROG X870 Crosshair / TUF RTX 4090

Jiaszzz_ROG
Customer Service Agent

Hello @Besjan 

In addition to Silent_Scone’s forum post regarding memory installation and configuration, the purchasing and installation guide available on the ROG STRIX B650E-F GAMING WIFI support page > Memory QVL section provides the following information:

・Ensure that all memory modules are from the same validated memory kit. Do not mix DIMMs from different memory kits—even if they are the same brand and model (e.g., two DIMMs each from two different memory kits). Mixing and matching DIMMs can result in a failure to boot and compatibility issues. In particular, the stability of a system with mixed DIMMs cannot be guaranteed when XMP (Intel)/D.O.C.P (AMD)/EXPO (AMD)/AEMP/AEMPII is enabled. For example, enabling XMP (Intel)/D.O.C.P (AMD)/EXPO (AMD)/AEMP/AEMPII to speeds above DDR5 4800MHz or above DDR4 3200MHz could result in an unstable system.

You may also refer to [Motherboard] How to query (CPU/memory) QVL List? for further details.

Thank you.