PBO stops working after AMD EXPO profile is applied

[hamsta007]

Hi. I posted recently about PBO on my B650E-I WIFI. Looks like i figured out what was wrong. I applied negative curve through PBO it works well then I turned on EXPO and the curve setting just stopped working. I tried to apply AMD ECO mode and the result was the same - no changes when RAM EXPO profile is applied.Can you help ? It's it a bios bug or some changes applied with enabling expo doesn't allow PBO to work?

Curve applied

CPU wattage and temps with curve applied without RAM overclocking

Changes that EXPO applies in BIOS

CPU temps and wattage after changes

My BIOS version is 2413. CPU - Ryzen 7 7700. RAM G.Skill DDR5-5600 EXPO CL30-36-36-89 1.25V F5-5600J3036D16GX2-FX5

[Jiaszzz_ROG]

Hello, @hamsta007 

Thank you for your prompt response and sharing the operational videos once again.
I've included further conclusions in our PM after we consult with relevant teams.

Thank you.

[hamsta007 · Accepted solution]

• Actually seems like I was wrong about PBO not workinng. It was just OCCT reporting incorrect numbers. Tried to use AIDA64 and found out that everything works as expected.