cancel
Showing results for 
Search instead for 
Did you mean: 

PBO stops working after AMD EXPO profile is applied

hamsta007
Level 8

Hi. I posted recently about PBO on my B650E-I WIFI. Looks like i figured out what was wrong. I applied negative curve through PBO it works well then I turned on EXPO and the curve setting just stopped working. I tried to apply AMD ECO mode and the result was the same - no changes when RAM EXPO profile is applied.Can you help ? It's it a bios bug or some changes applied with enabling expo doesn't allow PBO to work?

Curve applied
photo_2024-03-11_22-07-29.jpg

CPU wattage and temps with curve applied without RAM overclocking
Снимок экрана 2024-03-11 215825.png

Changes that EXPO applies in BIOS
photo_2024-03-11_22-07-31.jpg

CPU temps and wattage after changes

Снимок экрана 2024-03-11 220442.png

My BIOS version is 2413. CPU - Ryzen 7 7700. RAM G.Skill DDR5-5600 EXPO CL30-36-36-89 1.25V F5-5600J3036D16GX2-FX5

581 Views
11 REPLIES 11

Jiaszzz_ROG
Customer Service Agent

Hello, @hamsta007 

Thank you for your prompt response and sharing the operational videos once again.
I've included further conclusions in our PM after we consult with relevant teams.

Thank you.

sharing complete hardware info & software config details will help us better understand the issue 🙂

hamsta007
Level 8
  • Actually seems like I was wrong about PBO not workinng. It was just OCCT reporting incorrect numbers. Tried to use AIDA64 and found out that everything works as expected.