New Build. No screen post with 53-55 Q Codes

[MengusDew]

ROG MAXIMUS Z690 HERO EVA Edition MB
Intel I9 149 KF 14th Gen CPU
Corsair Vengeance RGB DDR5 32 (16x2) memory  X2

All new hardware

On power, all system LEDs lit up properly. There is no screen to monitor. Qcodes run through 17, 53, 54, and 55. Stays on 55. This is not my first build. 
I've tried only 1 ram stick, 2 ram stick, all the way up to 4, with correct slots being used accordingly. 

Currently installed is my old MSI RTX 2080 TI, but I have a new MSI RTX 4070 TI Super coming in mail.

What process of elimination should I take to locate and correct the problem?

Both new Corsair RM1000x PSU and Corsair ICUE CPU cooler installed. All compatible with system.

[MengusDew]

Also, there are no pins on the CPU, the pins are actually on the MB. I checkclosely with an electronic microscope, and no pins are bent. I Must be 1 of 2 things:
BIOS needs to be upgraded which is believable considered the MB was purchased and sat ojn jfor about 6 months prior to other hardware accrual. 
OOOORRR the weird chance that both sets of 2x16GB RAM, that was purchased on two separate occasions are bad.

[MengusDew]

The memory is validated in the QVL List....just not by the exact serial number. The latency is the same though.