Need help to change my SATA Mode to AHCI on my ROG Z790 Dark Hero.

[Digital567]

I think I need to change my SATA Mode from whatever I have it on right now to AHCI.

According to Samsung “Go to BIOS Settings / SATA Configuration and switch to AHCI mode”

My motherboard manufacturer is ASUS. ROG Z790 Dark Hero and ,

 I have the latest Bio BIOS Version. 1102, 3/15/2024 (ROG Z790 Dark Hero).

The problem is that I cannot find the setting to change my SATA mode in the BIOS.

This is where the setting should be located:

ANY HELP WOULD BE GREATLY APPRECIATED

[dennys2009]

In the latest board generations, there is only AHCI and RAID mode, there is no other.

[Jiaszzz_ROG]

Hello, @Digital567 

Due to the ongoing local holidays in our area, my response time may experience delays.
I apologize for any inconvenience the delayed replies may have caused.

Upon verification, ROG MAXIMUS Z790 DARK HERO defaults to AHCI mode, or you can switch to SATA mode in EZ mode.

If you have specific configuration requirements, we suggest trying to disable SATA mode.
Thank you.