cancel
Showing results for 
Search instead for 
Did you mean: 

Fan control

dforrest
Level 7

How do I get access to the site where I can view, monitor and perhaps adjust the fan speeds in my system?

388 Views
39 REPLIES 39

It was not my intention to accept the above as a solution!

Rude!

Good luck with figuring out your fans. My work here is done. Nothing more to say or suggest. Any other fellow PC builder will agree with my advise. 

Sad!  I am sure that, if contributors were to read the section of the "Tech News Today" article which I have referred to, they would see that there is an equally acceptable way of setting up fans without entering the BIOS.

My problem is that I cannot find where to download the "AI Suite V3" software needed.

Jiaszzz_ROG
Customer Service Agent

Hello, @dforrest 

May I ask if you are asking about downloading "AI Suite 3"?
You can find it by going to the ROG STRIX B760-A GAMING WIFI support page, selecting your operating system under Drive & Utility, and searching for AI Suite 3 to install it.


For more details, please refer to [Motherboard] AI Suite 3 related issues and instructions.

Thank you.

As the local holiday is ongoing, there may be further delays in responses.
We appreciate your patience in advance.

Thank you Jiaszzz_ROG.

Jiaszzz_ROG, unfortunately the install file you have recommended offers to install:

-Performance and Power Saving Utilities V2.03.42
-System Information V2.03.14
-EZ Update V3.03.08

but not:

-AI Suite 3 V3.03.36

 

I've downloaded it from the support site. I can see the folder there.

Silent_Scone_1-1716469582065.png

 

 

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

I agree but when I run setup.exe from the folder as you have partly-reproduced from your post, AI Suite 3 V3.03.36 is not shown as an option available.

Is this the folder I should be installing it from?  I ask this because I have just noticed that if I open the AISuite3_3.03.36 folder, there is a further setup.exe in the AppSuite subfolder in that.  Should I perhaps be using that setup file?

 

I have allowed Performance and Power Saving Utilities, System Information and EZ Update to install but am still not able to find a way to install AI Suite 3.

I have still not been able to install the fan control part of AISuite3 but have run Q-fan in the BIOS and appear to be able to satisfactory control fan properties in the FAN EXPERT 4 in Armoury Crate.