cancel
Showing results for 
Search instead for 
Did you mean: 

Fan control

dforrest
Level 7

How do I get access to the site where I can view, monitor and perhaps adjust the fan speeds in my system?

421 Views
39 REPLIES 39

Jaffacake
Level 9

Hi, 

 

I use Asus Armoury Crate to control the fans, but in the past when I wasn't as lazy, I custom control them in the BOIS. 

Its too much to type in here on using the BIOS, but if you search on YouTube I'm sure you'll find lots of useful information. 

Silent_Scone
Super Moderator

Hi @Jaffacake 

Use Armoury Crate Fan Xpert or Q-FAN in the UEFI.

I tend to use Q-FAN to reduce system overhead in the operating system.

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

dforrest
Level 7

Thanks.  Q-FAN sounds good for me but how do I download and install that!

It's in the UEFI, please see user manual for your motherboard.

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

In have downloaded and installed Armory Crate and have ASUS folders in "Program Files" and "Program Files (x86)", both with many sub-folders, but I have no idea what to do with them!.

QFAN is not available in Armoury Crate, it's a UEFI feature (BIOS).

If installed Armoury Crate should already be running. Check system tray

ezgif-5-87b54fa981.gif

Then click the Device button on the left side menu reel and go to Fan Xpert.

Silent_Scone_1-1715972634332.gif

 

 

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

I see nothing looking like this in Device Manager.  I believe that I have done something wrong in the install of Armoury Crate.  I would like to uninstall it and try again.  I see no "uninstall" procedure with it so can I just remove the two ASUS folders and try installing it again?  Is there anything else which should be deleted to give me a clean start?

 

Why are you looking in Device Manager? Perhaps you should get a system integrator to look at this for you.

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

https://www.asus.com/supportonly/armoury%20crate/helpdesk_download/

 

Download the uninstall tool from there, unzip it and the run it. It'll remove the Armoury Crate. 

Then download Armoury Crate from here: https://rog.asus.com/uk/armoury-crate/

Again, unzip, in install. Takes a while with a couple of restarts. 

Then go to start, and find Armoury Crate in your list of programs. Launch it. You'll see a number of icons to the left and of the screen, press 'i' (see attached photo) 

Screenshot_20240518_155854_edit_1777049255830401.jpg

let me know how you get on.