05-11-2025 12:14 PM
I get crashes and random BSOD with 2 sticks of ram in. One in A2 and B2. I ran mem test with both sticks and get this "The Windows Memory Diagnostic tested the computer's memory and detected hardware errors. To identify and repair these problems, contact the computer manufacturer"
Its been fine for about 2 months and this just began.
I get no memtest issues when I test each stick alone in A2.
I have 2 CORSAIR - VENGEANCE 32GB (2x16GB) DDR5 6400MHz C36 AMD EXPO & Intel XMP UDIMM
Ryzen 7600x
I have the latest bios.
Anby ideas?
2 weeks ago
Hello @revhighjak
We apologize for any inconvenience caused by the delayed response.
May we ask if any overclocking settings or manual adjustments were applied when the MemTest error occurred? If you clear CMOS and install both memory modules without any manual configuration, does the issue still persist?
Could you also confirm whether the currently installed memory kit part number CMP32GX5M2B6400C32W, which is listed on the TUF GAMING B650-PLUS WIFI memory QVL?
Thank you.