07-10-2024 04:53 AM
Dears,
I would like to know if I can already try to install my windows 11 pro without the NVIDIA GPU that I'm waiting to be delivered ?
It seems that Intel has integrated GPU in their CPU I9-14900KS.
It's a fresh new PC, here below my config :
Lian Li LANCOOL III (tower)
ASUS ROG MAXIMUS Z790 FORMULA (MB)
Be Quiet! Straight Power 12 ATX 3.0 1200w - 80 Plus Platinum (power)
Intel® Core™ i9-14900KS (CPU)
G.Skill Trident Z5 RGB memory module 48 GB 2 x 24 GB DDR5 8000 MHz (RAM)
Samsung 990 Pro MZ-V9P2T0BW NVMe M.2, PCIe 4.0 5 (SDD)
Corsair iCUE H170i Elite LCD XT 420mm (Water Cooling System)
An also, most important ! Based on your experience, do you see any incompatible components (especialy for the ram) in the config listed above ?
Thank you very much for your colaboration
Solved! Go to Solution.
07-10-2024 07:11 AM
Hi @jonathan_vb467
Yes, the KS has an iGPU so there's no problem using this to install Windows. Best to leave the system at complete defaults for the installation and not enable XMP overclocking.
07-10-2024 07:11 AM
Hi @jonathan_vb467
Yes, the KS has an iGPU so there's no problem using this to install Windows. Best to leave the system at complete defaults for the installation and not enable XMP overclocking.
07-10-2024 07:26 AM
Hello Silent_Scone,
Tks for the fast update !
My concern is more about the RAM ( I already checked the construtor website without any success) and where I have to plug in the Display (HDMI of the MB ?)
Note : I tried to start my PC and I got random code errors, I mean not just one but plenties of erros changing all the time, so diffucult to isolate...)
Tks for your quick answer;)
07-14-2024 06:37 PM
Hello, @jonathan_vb467
Regarding RAM specifications, is the memory you installed listed in the ROG MAXIMUS Z790 FORMULA QVL?
For specifications and relevant information, refer to the "purchasing and installation guide" on the same page or [Motherboard] How to query (CPU/memory) QVL List?
For the CPU integrated graphics output specifications, kindly refer to page xiii of the user manual:
You can connect via HDMI to port 7 on the rear panel of the motherboard.
May I ask if the random error codes during boot are Q-Codes, and besides the error codes, are there any other issues, such as failure to boot?
Thank you.