cancel
Showing results for 
Search instead for 
Did you mean: 

AI Overclocking CPU bad with Hero Maximus Z790

dubignyp
Level 10

With a CPU i5 13600k to adjust the bios in overclocking ai mode
Make problems when you start having a lot of tasks on the internet with higher graphics (browser game).

The error is simple, the PC freezes and does nothing anymore, no longer responds, neither my mouse and nor my keyboard.
With this error that nothing responds, the PC will simply restart by indicating no errors to the start -up, either or I have to press the ON / OFF button of the tower.

This type of error without indicating an error is that the PC has stopped calculating and it will come more on the CPU side.

I was then in the bios and I put "Automatic", I deleted the Overclocking AI.
And, there for several days, he has not made this kind of error.
I conclude that I found this problem why I have this problem, it is overclocking that is lacking in this type of motherboard for this processor.

It must be improved in future organic updates for this type of error.

314 Views
1 ACCEPTED SOLUTION

Accepted Solutions

Silent_Scone_2-1706787891148.png

https://www.asus.com/microsite/motherboard/Intelligent-motherboard/AI-Overclocking.html

Please clear the CMOS prior to following the guidelines

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

View solution in original post

4 REPLIES 4

Silent_Scone
Super Moderator

Hi, did you correctly profile the system and cooling before activating AI OC as per the AI Overclocking instructions in the UEFI?

AI overclocking is still considered overclocking. Although the rules are fairly tight, there is only so much that can be determined by the VID. You can also try Intel Thermal Velocity Boost profiles, however, these also depend on the CPU silicon and thermal conditions. We're still running the CPU out of spec, and as such there are no assurances due to varience between parts.

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

I had simply selected in the choice of IA overclocking, I did nothing else. I also did not increase a boost.

So that is not enough to simply put the IA overclocking, there are also other parameters to make?

In my old DDR4 motherboard, I had overclocking and that was not lacking.

It was well in the BIOS that I registered this choice for CPU, which is a "automatic" default choice. It is an adjustment that is on the same page where the RAM is also adjusted in automatic, manual, xMP1, XMP2.

Silent_Scone_2-1706787891148.png

https://www.asus.com/microsite/motherboard/Intelligent-motherboard/AI-Overclocking.html

Please clear the CMOS prior to following the guidelines

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

Indeed I did not do any test of resistance, I simply selected Manuel AI Overclocking and restart.